Tel: 914-769-9200
sales@geminielec.com
Subscribe to this RSS feed
Products

Products (213)

Monday, 06 May 2013 21:23

Limit switch SERIE MP800

Written by

MICROPRECISION SERIES MP800


The limit switch family MP800 of safety and limit switches with their metal or plastic housing are ideally suited to application where precise shutdown is required. For example when the positions of doors and access hatches are monitored.
They can be used in safety circuits as the NC contact is positively-opening in compliance with IEC 60 947-5-1.

 

Descriptions

  MP800-MP810-MP850 MP820-MP830-MP870
Approval IEC 947-5-1
Housing Thermoplastic Metal
Mechanism

Forced break

Slow action - Snap action

Forced break

Slow action - Snap action
Circuit 1NO + 1NC / 2NC  / 2NO+1NC / 1NO+2NC / 3NC
Termination PG13.5 / 1/2" NPT / PG11 / M16 / M20
Actuator Variety of operation heads
     
Degree of protection IP65 IP66
Power rating

AC-15 3A

DC-13 0.27A
Thermal current 10A 10A
Dimensions

EN 50 047 30 mm / 50 mm

EN 50 041 40 mm
     
Operating temperature range -25°C to +70°C
Mechanical life 30 x 106
Be the first to comment!
Read more...
Monday, 26 March 2012 16:42

LSI/CSI INTEGRATED CIRCUITS

Written by

alt

LSI / CSI

Integrated Circuits

 

 

  • PROGRAMMABLE DIGITAL DELAY TIMERS - Applications Include: Time Delay Relays for HVAC and Industrial Controls, POR Hold-Off, One-Shot and Repeating Timed Operations
  • DIVIDER ICs - Applications Include: Time base generators
  • INCREMENTAL ENCODER INTERFACE - Applications Include: Motion Control, X Y Tables, Robotics, Measurement Systems
  • LIGHTING CONTROLS - Applications Include: Dimmers and Timers for Wall Switch applications, Step and Continuous Dimmers for touch lamps, Dimming Low-Voltage Halogen lamps
  • COUNTERS - Applications Include: Industrial, Scientific and Frequency counting Counting modes: Quadrature (x1, x2, x4); Non-Quadrature, Normal/Modulo-N; 24 Hour Clock; Non-Recycle, Binary; BCD
  • PIR MOTION DETECTOR INTERFACE - Applications Include: Occupancy Sensing for Energy Saving and Security, Remote Camera Operation, Outdoor Security Lighting
  • BRUSHLESS DC MOTOR CONTROLS - Applications Include: Open and Closed Loop Speed Controls for Tools, Robotics, Pumps, Fans
  • STEPPER MOTOR CONTROLS  - Applications Include: Open Loop Speed Controls for Robotics
  • AC MOTOR CONTROLS - Applications Include: Speed Controls for Small Appliance Motors, Fans, Blenders, Auto Shut-Off Appliances
  • PROGRAMMABLE DIGITAL LOCKS - Applications Include: Keyless Locks for Automotive Ignitions, Machine Area Access, Safes and Doors
Be the first to comment!
Read more...
Monday, 06 May 2013 21:24

Metal Foil Resistors

Written by

RNC90Y Metal Foil Resistors

Wilbrecht LEDCO, inc' metal foil resistors are constructed to reliably meet the tightest temperature coefficients and resistance tolerances while providing long term stability in high reliability applications.

SMD Resistors based on Vishay Precision Group (VPG) supplied materials.

Trimmed and tested to the exact value in our Huron, SD factory, a VPG authorized Precision Center.

The resistor's unique two-wire lead construction abates mechanical stresses and provides increased protection against vibration in military and aerospace applications. All production is documented to QPL standards.

 

Series Descriptions
Through Hole, RNC90Y

- These commercial grade metal foil resistors provide extreme stability for A/D circuits.

- These close tolerance metal foil resistors are approved for MIL-PRF-55182/RNC90 (R Level)

- The WN Series is qualified to the NASA S-311-P-813 specification.

Surface Mount VSM, VSMP

SMD Resistors based on Vishay Precision Group (VPG) supplied materials.

- Commercial SMD with a TCR of ± 2ppm.

- Commercial SMD with a TCR of ± 0.2ppm.
Be the first to comment!
Read more...
Tuesday, 19 May 2020 21:41

Micro-D Connectors M83513

Written by

Amphenol Canada - Micro-D M83513 Connectorsalt

Micro-D M83513 Connectors

 

The Amphenol Micro-D connector series (M83513) offers proven military spec performance and reliability in rectangular and stripline micro connectors. The Micro-D connectors are available in rectangular D, strip and custom card edge configurations, with contacts on .050 (1.27) centers. Inserts in Micro-D miniature connectors with signal and coax/power contacts are also available. The socket contact is a precision fabricated tube. Pin and socket contacts are epoxy retained in high-grade thermoplastic insulators. The contact system has proven reliability, exceeding the performance specifications of MIL-DTL-83513. Terminations are available in a broad range including solder cup, terminated to wire harness, vertical and right angle PCB. Plastic and metal shell versions are available in Micro-D series, in a broad range of shell finishes. A broad range of mounting hardware is available (jackscrews, posts, guide pins) as well as straight and angled back-shell.

HI-DENSITY CARD CONNECTOR

Designed for a space-conscious industry. Provides an extremely dense and reliable interconnection for card-to-card and card-to-cable applications. Connector performance per M83513 specifications. Available in vertical mount for thru-hole applications and wire harness termination styles for both plug and receptacle.Wide selection of wire sizes (24 thru 30). Shell employs a polarizing "D" shape for correct mating.
 

FEATURES AND BENEFITS

  • Amphenol design not like other stamped and formed designs
  • Fully qualified per MIL-DTL-83513 requirements
  • One piece contact with equally spaced compliant tines
  • Gold over Nickel versus gold over the copper flash barrier
  • Tighter control over plating process
  • Uniform Plating thickness
  • Automated Stamping versus twist process variations
  • Integrated closed engaging end ensures uniform insertion forces
  • Low mating/unmating force
  • Preferred contact for space and satellite applications
  • Continuous connection along the length of the contact beam (line contact) versus multi-point connection (point contact)

MICRO-MINIATURE CONTACT SYSTEM

The Micro-miniature contact system employs a precision stamped and formed pin contact recessed within the plug insulator. The contact system has proven reliability, exceeding the performance specifications of MIL-DTL-83513.

MICRO-D STRIP CONNECTOR

One piece insulator: Polyphenylene sulfide (Ryton) Contacts (1-30 positions): Copper alloy, gold plate Guide pin (optional, one or both ends): 300 series stainless steel Wide selection of wire sizes, types, and color finish. Coupling feature: Friction Contact spacing: .050" (1.27) centres

MICRO-D CONNECTOR SAVER

  • A Connector Saver provides protection against excessive wear subjected to excessive mating and un-mating during any process or testing.
  • Space reduction (2 in 1 connectors)
  • Opposite mating genders
  • No termination required ready to us
DOWNLOAD 69 PAGE MICRO M83513 CONNECTOR CATALOG
 

PERFORMANCE SPECIFICATIONS Micro-D
Contact Rating:   3 amps max.
Magnetic Permeability: ASTM-A342/A342M 2.0 µ max.
Dielectric Withstanding Voltage (DWV) :
Test voltage rms 60Hz ac volts		 EIA-364-20 At sea level: 600 vac for solder pot and standard wire at 70,000 ft altitude (reduced barometric pressure): 150 vac for solder pot and standard wire
Insulation Resistance: EIA-364-21 5000 megohms min.
Contact Resistance: EIA-364-23 8 milliohms at 3 amps
Contact Engagement Force: MIL-DTL-83513 6.0 oz. max.
Contact Separation Force: MIL-DTL-83513 0.5 oz. min.
Connector Mating Force: MIL-DTL-83513 (10 oz. times no. of contacts) max.
Connector Unmating Force: MIL-DTL-83513 (0.5 oz. times no. of contacts) min.
Thermal Shock (Temperature Cycling): EIA-364-32, condition I, 5 cycles No physical damage -55°C to +125°C (-67°F to +257°F)
Mechanical Shock (Specified Pulse): EIA-364-27, condition E No physical damage and no loosening of parts, No loss of continuity > 1 microsec.
Vibration: EIA-364-28, condition IV No physical damage and no loosening of parts, No loss of continuity > 1 microsec.
Durability: MIL-DTL-83513 500 mating cycles at a rate of 200 ±100 CPH
Salt Spray (Corrosion): EIA-364-26, condition B Meets mateability and contact resistance requirements
Fluid Immersion: MIL-DTL-83513 Meets mateability requirements
Humidity: EIA-364-31 Meets D.W.V. and insulation resistance requirements 1 megohm nim. after step 6, 1000 megohms min. after 24 hrs. of conditioning
Insert Retention (class M): MIL-DTL-83513 50 lbs. min. (axial load)
Solderability: MIL-STD-202, method 208 Withstand test conditions
Contact Retention E: IA-364-29 5 lbs. min. (axial load)
Thermal Vacuum Outgassing (Space Classes): SP-R-0022 or ASTM E595 Exceeds MIL-DTL-83513 requirements; standard is 1.0% max TML and 0.1% max VCM or original mass
MATERIAL SPECIFICATIONS Micro-D
Shell Material: Std. Metal (100, 106, 110 & M13 Series) Aluminum alloy 6061-T6 per QQ-A-200/8
104 Series Stainless Steel
Std. Plastic (101, 102 & 105 Series) Polyphenylene sulfide (Ryton)
High Temp Plastic High-performance thermoplastic (PEEK or equivalent)
Shell Finish (Metal Shells only): Anodized, Cadmium, Gold, Irridite/Alodine Electroless Nickel, Tin
Insulator/PCB Backshell: Polyphenylene sulfide (Ryton) per MIL-M-24519, type GST-40F; color: Black
Contacts: Copper alloy, 50 micro-inches gold plate over nickel
Hardware: Stainless Steel, Passivated
Potting Material: Std. Epoxy EP1730-1 or equivalent; color: Black
High Temp Epoxy EP173859 or equivalent
Be the first to comment!
Read more...
Monday, 26 March 2012 16:35

MICROPRECISION SWITCHES / MICROWSITCHES

Written by

alt

MICROPRECISION

SWITCHES / MICROWSITCHES:

 

Microprecision manufactures a large range of microswitches. Most of the products are IP67 or even IP68 protected. They can be supplied with custom cable solutions to adapt to the customers specific application. The RoHS compliant microswitches show very long mechanical life, small differential travel and a large range of standard and custom actuators.

Be the first to comment!
Read more...
Monday, 06 May 2013 21:21

Microswitch SERIE MP110

Written by

Microprecision SERIES MP110

Sealed basic snap action microswitch. A precision microswitch for high breaking capacity, the MP110 serie offers IP67 protection using wide range of interchangeable actuators.

The switching mechanism is completely protected by the housing, which is itself assembled by ultrasonic welding. However, as it has protruding connection terminals, it has to be provided with an accessory system of connection,
which can be :

  • Push-on clips 6.35 x 0.80 mm (AMP)
  • Plug-in system of connection MP100-.. IP67
  • Protective terminal covers MP110-Z.. IP64

 

Descriptions

Approval

EN 61058-1

UL 61058-1
Housing Glass fiber reinforced (PBT or PA 6T/66)
Plunger PC
Membrane Fluorsilicone - Upon request other material
Mechanism Contacts Change-over, Snap-action with blade in Beryllium Copper
Contact material Fine Silver, Gold contact upon request
Termination Push-on clip 6.35 x 0.80 mm, protective cover
Actuator Overall dimensions in stainless steel
Degree of protection

Housing IP67

Terminals IP00

Plug-in MP100 IP67

Protective cover IP64
Class of protection II
Micro-switch μ
Contac-gap 0.50 mm
Dimensions

DIN 41 635, EF - form

49 x 21.5 x 17.5 mm
Power rating

400VAC / 10A

250VAC / 15A
Operating range force 0.2 to 6.0 N, depending actuator
Operating temperature range

EN 61058 -40°C to +130°C (PBT and PA 6T/66)

UL 61058 -40°C to +115°C (PA 6T/66)

UL 61058 -40°C to +125°C from the second half of 2014 (PBT)
Mechanical life 50 x 106
Standard 50'000 cycles

 

 

Actuator
Type 0 : Basic switch

Actuating Force Fa max. (N)

Release Force Fr min (N)

Free Position Pr (mm)

Operating Position Pa (mm)

Over-travel sr min. (mm)

Differential movement sd max. (mm)

6.0

3.0

17.4 ± 0.5

16.7 ± 0.3

0.25

0.06
Type 1S29 : Plunger

Actuating Force Fa max. (N)

Release Force Fr min (N)

Free Position Pr (mm)

Operating Position Pa (mm)

Over-travel sr min. (mm)

Differential movement sd max. (mm)

6.0

3.0

29.3 ± 0.6

28.5 ± 0.3

2.0

0.08
Type 1A : Plunger, thread short

Actuating Force Fa max. (N)

Release Force Fr min (N)

Free Position Pr (mm)

Operating Position Pa (mm)

Over-travel sr min. (mm)

Differential movement sd max. (mm)

6.0

3.0

39.1 ± 0.6

38.4 ± 0.3

5.0

0.08
Type 1A58 : Plunger, thread

Actuating Force Fa max. (N)

Release Force Fr min (N)

Free Position Pr (mm)

Operating Position Pa (mm)

Over-travel sr min. (mm)

Differential movement sd max. (mm)

6.0

2.5

58.0 ± 1.0

57.3 ± 0.3

10.0

0.10
Type 1BL : Toller plunger, thread - Upon request steel roller , transversal roller

Actuating Force Fa max. (N)

Release Force Fr min (N)

Free Position Pr (mm)

Operating Position Pa (mm)

Over-travel sr min. (mm)

Differential movement sd max. (mm)

6.0

3.0

51.3 ± 0.6

50.6 ± 0.3

5.0

0.08
Type 3A : Lever - reverse action - Upon request lever other side

Actuating Force Fa max. (N)

Release Force Fr min (N)

Free Position Pr (mm)

Operating Position Pa (mm)

Over-travel sr min. (mm)

Differential movement sd max. (mm)

4.5

1.2

31.3 ± 1.5

28.3 ± 1.5

3.5

0.50
Type 5AL : Roller lever - reverse action - Upon request lever other side, steel roller, transversal roller

Actuating Force Fa max. (N)

Release Force Fr min (N)

Free Position Pr (mm)

Operating Position Pa (mm)

Over-travel sr min. (mm)

Differential movement sd max. (mm)

4.5

1.2

35.8 ± 1.5

31.9 ± 1.5

3.5

0.60
Type 6AL : Stiff roller lever - reverse action - Upon request lever other side, steel roller, transversal roller

Actuating Force Fa max. (N)

Release Force Fr min (N)

Free Position Pr (mm)

Operating Position Pa (mm)

Over-travel sr min. (mm)

Differential movement sd max. (mm)

4.5

1.2

41.9 ± 1.5

37.9 ± 1.5

3.5

0.60
Type 7A40 : Direct action adjustable lever

Actuating Force Fa max. (N)

Release Force Fr min (N)

Free Position Pr (mm)

Operating Position Pa (mm)

Over-travel sr min. (mm)

Differential movement sd max. (mm)

0.6

0.2

-

-

-

0.80
Type 7AC : Direct action adjustable lever

Actuating Force Fa max. (N)

Release Force Fr min (N)

Free Position Pr (mm)

Operating Position Pa (mm)

Over-travel sr min. (mm)

Differential movement sd max. (mm)

0.2

0.05

-

-

-

4.00
Type 8AL40 : Direct action adjustable roller lever

Actuating Force Fa max. (N)

Release Force Fr min (N)

Free Position Pr (mm)

Operating Position Pa (mm)

Over-travel sr min. (mm)

Differential movement sd max. (mm)

0.6

0.2

-

-

-

0.80

 

Standard wiring diagram
Code Actuator Diagram Color MP100-../...
Direct action

0

1S29

1A

1A58

1BL

7A40

7AC

8AL40

PVC : 1 / Brown - 2 / Black - 4 / Blue

SI : 1 / Red - 2 / White - 4 / Blue

PUR : 1 / Red - 2 / White - 4 / Blue
Reverse action

3A

5AL

6AL

 PVC : 1 / Brown - 2 / Blue - 4 / Black

SI : 1 / Red - 2 / Blue - 4 / White

PUR : 1 / Red - 2 / Blue - 4 / White

 

Option terminal
MP110-Z
MP100-../..

Description

L : Length of the cable in meter

MP100-K(L)/10 PVC cable 3 x 1 mm2  -20°C to +70°C; 400VAC 10A

MP100-K(L)/15 PVC cable 3 x 1.5 mm2  -20°C to +70°C; 250VAC 15A

MP100-SI(L)/10 Silicone cable 3 x 1 mm2 -40°C to +130°C; 400VAC 10A

MP100-SI(L)/15 Silicone cable 3 x 1.5 mm2 -40°C to +130°C; 250VAC 15A

MP100-PUR(L)/10 Polyurethane cable 3 x 1 mm2  -40°C to +90°C; 400VAC 10A

MP100-PUR(L)/15 Polyurethane cable 3 x 1.5 mm2  -40°C to +90°C; 250VAC 15A

 

Ordering information
MP11 0 - 5AL + MP100-K2/10

Contact material

0: Silver contact

1: Gold contact

Actuator

0: Basic switch - pin plunger

1S29 : Plunger

1A : Plunger, thread short

1A58 : Plunger, thread

1BL : Roller plunger, thread

3A : Lever - reverse action

5AL : Roller lever - reverse action

6AL : Stiff roller lever - reverse action

7A40 : Direct action adjustable lever

7AC : Direct action adjustable lever

8AL40 : Direct action adjustable roller lever
If needed Connecting

MP110-Z Protective cover IP64

MP100-K../.. Plug-in PVC cable L(m), option 10A or 15A

MP100-SI../.. Plug-in Silicone cable L(m), option 10A or 15A

MP100-PUR../.. Plug-in Polyurethane cable L(m), option 10A or 15A
Be the first to comment!
Read more...
Monday, 06 May 2013 21:21

Microswitch SERIE MP200

Written by

MICROSWITCH SERIES MP200

 

The MP200 is a IP67 sealed snap action microswitch with potted cable for demanding industrial applications. An IP68 protection with strengthened cable outlet and increased actuating force for operation in liquids is also available. All actuators are in stainless steel for maximum protection in hazardous industrial environments.

The switch can be supplied with 2 different electrical circuits. The MP210 Version is a single pole double throw microswitch for a power rating of 15A / 250VAC. In its MP220 version a single pole double break circuit can double-break a power line of up to 10A / 250VAC.

Operational Temperature rating under EN61058 is -40°C to +130°C, but temperature rating as well as the power rating may change based on the selected potted cable material and cross section

 

Descriptions

 

MP210

MP220
 
Approval

EN 61058-1

UL 61058-1

upon request CSA C22.2

EN 61058-1

UL61058-1
Standard

EN 61058 50'000 cycles

UL 61058 50'000 cycles

CSA C22.2 6'000 cycles

EN 61058 50'000 cycles

UL 61058 50'000 cycles
Power rating

250VAC / 15A - Wires 1.50 mm2

400VAC / 10A - Wires  1.00 mm2

250VAC / 10A - Wires  1.00 mm2
Housing Glass fiber reinforced (PBT or PA 6T/66)
Plunger PC
Membrane Fluorsilicone - Upon request other material
Mechanism Snap-action with blade in Beryllium Copper
     
Contact material Fine Silver, Gold contact upon request
Termination cable

PVC -20°C to 70°C

PVCU -20°C to 105°C

PUR -40°C to 90°C

SI -40°C to 130°C
Actuator All parts in stainless steel
   
Degree of protection

Housing IP67 - Upon request IP68

Connexion IP67
Class of protection II
Micro-switch μ
Contac-gap 0.80 mm
Dimensions

DIN 41 635, E - form

49 x 35 x 17.5 mm
Operating range force 0.2 to 6.0 N, depending on actuator

Operating temperature housing

(cable choice may lower temperature)

EN 61058 -40°C to +130°C (PBT and PA 6T/66)

UL 61058 -40°C to +115°C (PA 6T/66)

UL 61058 -40°C to +125°C from the second half of 2014 (PBT)
Mechanical life 50 x 106

 

 

Actuator
Type 0 : Basic switch    

Actuating Force Fa max. (N)

Release Force Fr min (N)

Free Position Pr (mm)

Operating Position Pa (mm)

Over-travel sr min. (mm)

Differential movement sd max. (mm)

6.0

2.5

17.4 ± 0.5

16.5 ± 0.3

0.25

0.10
Type 1S29 : Plunger    

Actuating Force Fa max. (N)

Release Force Fr min (N)

Free Position Pr (mm)

Operating Position Pa (mm)

Over-travel sr min. (mm)

Differential movement sd max. (mm)

6.0

2.5

29.3 ± 0.6

28.4 ± 0.3

2.0

0.12
Type 1A : Plunger, thread short    

Actuating Force Fa max. (N)

Release Force Fr min (N)

Free Position Pr (mm)

Operating Position Pa (mm)

Over-travel sr min. (mm)

Differential movement sd max. (mm)

6.0

2.5

39.1 ± 0.6

38.4 ± 0.3

5.0

0.12
Type 1A58 : Plunger, thread    

Actuating Force Fa max. (N)

Release Force Fr min (N)

Free Position Pr (mm)

Operating Position Pa (mm)

Over-travel sr min. (mm)

Differential movement sd max. (mm)

6.0

2.5

58.0 ± 1.0

57.2 ± 0.3

10.0

0.12
Type 1BL : Roller plunger, thread - Upon request steel roller , transversal roller

Actuating Force Fa max. (N)

Release Force Fr min (N)

Free Position Pr (mm)

Operating Position Pa (mm)

Over-travel sr min. (mm)

Differential movement sd max. (mm)

6.0

2.5

51.4  ± 0.6

50.7 ± 0.3

5.0

0.12
Type 3A : Lever - reverse action - Upon request lever other side

Actuating Force Fa max. (N)

Release Force Fr min (N)

Free Position Pr (mm)

Operating Position Pa (mm)

Over-travel sr min. (mm)

Differential movement sd max. (mm)

4.5

1.2

31.1 ± 1.5

29.0 ± 1.5

3.5

0.80
Type 5AL : Roller lever - reverse action - Upon request lever other side, steel roller, transversal roller

Actuating Force Fa max. (N)

Release Force Fr min (N)

Free Position Pr (mm)

Operating Position Pa (mm)

Over-travel sr min. (mm)

Differential movement sd max. (mm)

4.5

1.2

35.5 ± 1.5

32.5 ± 1.5

3.5

0.90
Type 6AL : Stiff roller lever - reverse action - Upon request lever other side, steel roller, transversal roller

Actuating Force Fa max. (N)

Release Force Fr min (N)

Free Position Pr (mm)

Operating Position Pa (mm)

Over-travel sr min. (mm)

Differential movement sd max. (mm)

4.5

1.2

41.6 ± 1.5

38.6 ± 1.5

3.5

0.90
Type 7A40 : Direct action adjustable lever

Actuating Force Fa max. (N)

Release Force Fr min (N)

Free Position Pr (mm)

Operating Position Pa (mm)

Over-travel sr min. (mm)

Differential movement sd max. (mm)

0.6

0.2

-

Ajustable

-

1.20
Type 7AC : Direct action adjustable lever

Actuating Force Fa max. (N)

Release Force Fr min (N)

Free Position Pr (mm)

Operating Position Pa (mm)

Over-travel sr min. (mm)

Differential movement sd max. (mm)

0.2

0.05

-

Ajustable

-

5.00
Type 8AL40 : Direct action adjustable roller lever

Actuating Force Fa max. (N)

Release Force Fr min (N)

Free Position Pr (mm)

Operating Position Pa (mm)

Over-travel sr min. (mm)

Differential movement sd max. (mm)

0.6

0.2

-

Ajustable

-

1.20

 

Standard wiring diagram
  Code Actuator Diagram Color
Direct action

0

1S29

1A

1A58

1BL

7A40

7AC

8AL40

 MP210

PVC / PVCU : 1 / Brown - 2 / Black - 4 / Blue

SI : 1 / Red - 2 / White - 4 / Blue

PUR : 1 / Red - 2 / White - 4 / Blue
MP220

PVC / PVCU : 11/12 -  Brown ; 23/24 - Blue

SI : 11/12 -  White ; 23/24 - Blue

PUR : 11/12 -  Brown ; 23/24 - Blue
Reverse action

3A

5AL

6AL

 MP210

PVC / PVCU : 1 / Brown - 2 / Blue - 4 / Black

SI : 1 / Red - 2 / Blue - 4 / White

PUR : 1 / Red - 2 / Blue - 4 / White
MP220

PVC / PVCU : 11/12 -  Brown ; 23/24 - Blue

SI : 11/12 -  White ; 23/24 - Blue

PUR : 11/12 -  Brown ; 23/24 - Blue

 

Ordering information
  MP2 1 0 - 5AL / 3 100 / 200 SI

Circuit

1 : Changeover

2 : Double break

                      

Contact material

0 : Silver contact

1 : Gold contact

                      

Actuator

0: Basic switch - pin plunger

1S29 : Plunger

1A : Plunger, thread short

1A58 : Plunger, thread

1BL : Roller plunger, thread

3A : Lever - reverse action

5AL : Roller lever - reverse action

6AL : Stiff roller lever - reverse action

7A40 : Direct action adjustable lever

7AC : Direct action adjustable lever

8AL40 : Direct action adjustable roller lever

                      

Number of conducteur

3 : MP210 Changeover

4 : MP220 Double break

                      

Wires Section

100 : 1.00mm2 - 400VAC / 10A (MP210); 250VAC / 10A (MP220)

150 : 1.50mm2 - 250VAC / 15A (MP210)

                      

Length of the cable in centimeter (cm)

                      

Cable material

PVC : -20°C to +70°C

PVCU : -20° to 105°C

SI : Silicone -40°c to +130°C

PUR : Polyurethane -40°C to +90°C

                      
Be the first to comment!
Read more...
Monday, 06 May 2013 21:21

Microswitch SERIE MP300

Written by

Microswitch SERIES MP300

A miniature IP67/68 microswitch with a service range up to 170°C and stainless steel levers, for a wide range of applications, including those in the most hostile industrial environments. The microswitch MP300 Series features unparalleled flexibility in terms of levers and standard telescopic plungers. Together with the option of manufacturing customized actuators, the applications are virtually unlimited.

 

Descriptions

Approvals

EN 61058-1

Upon request: UL 1054, CSA C22.2, ATEX  II3d/Ex t IIIB 84°C Dc
Housing Glass fiber reinforced
Plunger PPS
Membrane Fluorsilicone elastomer, other material upon request
Mechanism Contacts Change-over, Snap-action with blade in Beryllium Copper
Contact material Fine Silver, Gold contact upon request
Termination

Cable and Leads:  Standard 0.75 mm2 / 18AWG

PVC / PVCU -20°C to 70°C

PUR -40°C to 90°C

SI -40°C to 130°C

PTFE -40° to 170°C

Other material upon request
Cable outlet

Standard side of button

Other side upon request
Actuator Overall dimensions in stainless steel
Degree of protection

IP67

Upon request IP68
Class of protection II
Micro-switch μ
Contact-gap 0.80 mm
Dimensions

DIN 41 635, form A

31 x 24 x 10.3 mm
Power rating 250VAC / 6A
Operating range force 1.3 to 4.0 N, depending actuator
Operating temperature range

EN 61058 -40°C to +130°C depending cable (+170°C upon request)

UL 1054 +90°C (upon request)

EN 60079 (ATEX) -15°C to +80°C (upon request)

CSA - C22.2 T amb. (upon request)
Mechanical life 50 x 106
Standards

EN61058     50'000 cycles

UL1054        10'000 cycles

CSA C22.2   6'000 cycles

 


Actuator
Type 0 : Basic switch

Actuating Force Fa max. (N)

Release Force Fr min (N)

Free Position Pr (mm)

Operating Position Pa (mm)

Over-travel sr min. (mm)

Differential movement sd max. (mm)

3.5

1.0

15.3 ± 0.3

14.7 ± 0.2

0.20

0.05
Type 1MS27 :  Telescopic plunger

Actuating Force Fa max. (N)

Release Force Fr min (N)

Free Position Pr (mm)

Operating Position Pa (mm)

Over-travel sr min. (mm)

Differential movement sd max. (mm)

3.5

1.0

27.7 ± 0.6

27.2 ± 0.3

2.0

0.1
Type 1M :  Telescopique plunger, thread

Actuating Force Fa max. (N)

Release Force Fr min (N)

Free Position Pr (mm)

Operating Position Pa (mm)

Over-travel sr min. (mm)

Differential movement sd max. (mm)

3.5

1.0

50.3 ± 0.6

49.7 ± 0.3

5.0

0.1
Type 1ML : Telescopic with roller, thread - upon request transversal roller

Actuating Force Fa max. (N)

Release Force Fr min (N)

Free Position Pr (mm)

Operating Position Pa (mm)

Over-travel sr min. (mm)

Differential movement sd max. (mm)

3.5

1.0

49.8 ± 0.6

48.3 ± 0.3

5.0

0.1
Type 3MA : Stiff lever - reverse action - Upon request lever outside of switch

Actuating Force Fa max. (N)

Release Force Fr min (N)

Free Position Pr (mm)

Operating Position Pa (mm)

Over-travel sr min. (mm)

Differential movement sd max. (mm)

2.5

1.0

26.0 ± 1.0

24.2 ± 0.6

2.5

0.8
Type 5MAL : Stiff roller-lever - reverse action - Upon request lever outside of switch, Stainless steel roller

Actuating Force Fa max. (N)

Release Force Fr min (N)

Free Position Pr (mm)

Operating Position Pa (mm)

Over-travel sr min. (mm)

Differential movement sd max. (mm)

3.0

1.0

35.6 ± 1.0

34.0 ± 0.6

2.5

0.8
Type 6MAL : Stiff tip-action roller - reverse action - Upon request lever outside of switch, Stainless steel roller

Actuating Force Fa max. (N)

Release Force Fr min (N)

Free Position Pr (mm)

Operating Position Pa (mm)

Over-travel sr min. (mm)

Differential movement sd max. (mm)

3.0

1.0

41.5 ± 1.0

39.8 ± 0.6

2.5

0.8
Type 7M : Stiff lever - direct action

Actuating Force Fa max. (N)

Release Force Fr min (N)

Free Position Pr (mm)

Operating Position Pa (mm)

Over-travel sr min. (mm)

Differential movement sd max. (mm)

1.3

0.3

19.0 ± 1.0

16.5 ± 0.8

0.5

0.8
Type 8ML25 : Stiff roller - lever - direct action - Upon request Stainless steel roller

Actuating Force Fa max. (N)

Release Force Fr min (N)

Free Position Pr (mm)

Operating Position Pa (mm)

Over-travel sr min. (mm)

Differential movement sd max. (mm)

3.5

1.0

26.5 ± 1.0

25.7 ± 0.3

0.2

0.1

 

 

Standard wiring diagram
Code Actuator Diagram Color
Direct action

0

1MS27

1M

1ML

7M

8ML25

1 : Brown

2 : Black

4 : Blue
Reverse action

3M

5MAL

6MAL

 

 

Ordering information
3717
MP3 2 0 - 8ML25 / 375 / 100 PVC

Housing

1: without lever

2: with lever

Contact material

0: Silver contact

1: Gold contact

Actuator

0: Basic switch - pin plunger

1MS27 : Plunger

1M : Plunger, thread short

1ML : Roller plunger, thread

3MA : Lever - reverse action

5MAL : Roller lever - reverse action

6MAL : Stiff roller lever - reverse action

7M : Direct action lever

8ML25 : Direct action roller lever

375 : 3 Wires section 0.75 mm2

318 : For UL Certification 3 wires 18 AWG
Lenght of  cable in cm

Material of cable

PVC: Polyvinyl Chloride

PVCU : Switch with UL certification

PUR: Polyurethane

SI: Silicone
Be the first to comment!
Read more...
Monday, 06 May 2013 21:08

Microswitch SERIE MP40

Written by

Microswitch SERIES MP40

 Basic snap action microswitch. A precision microswitch for high breaking capacity, the MP40 serie offers IP40 protection with screw lug or solder terminals using wide range of interchangeable actuators.

 

Descriptions

Approval

EN 61058-1

UL 61058-1
Housing Glass fiber reinforced (PBT or PA 6T/66)
Plunger PBT
Mechanism Contacts Change-over, Snap-action with blade in Beryllium Copper
Contact material Fine Silver, Gold contact upon request
Termination Screw, soldering lugs, protective cover upon request
Actuator Overall dimensions in stainless steel
Degree of protection

Housing IP40

Terminals IP00

Cover IP20
Class of protection II
Micro-switch μ
Contac-gap 0.30 mm
Dimensions

DIN 41 635, form A

49 x 21 x 17 mm
Power rating

250VAC / 15A
Operating range force 0.2 to 6.0 N, depending actuator
Operating temperature range

EN 61058 -40°C to +130°C (PBT and PA 6T/66)

UL 61058 -40°C to +110°C (PA 6T/66)

UL 61058 -40°C to +130°C from the second half of 2014 (PBT)
Mechanical life 50 x 106
Standard 50'000 cycles

 

 


 

 

Actuator
Type 0 : Basic switch

Actuating Force Fa max. (N)

Release Force Fr min (N)

Free Position Pr (mm)

Operating Position Pa (mm)

Over-travel sr min. (mm)

Differential movement sd max. (mm)

5.0

2.5

16.3 ± 0.5

15.9 ± 0.3

0.25

0.05
Type 1S29 : Plunger

Actuating Force Fa max. (N)

Release Force Fr min (N)

Free Position Pr (mm)

Operating Position Pa (mm)

Over-travel sr min. (mm)

Differential movement sd max. (mm)

5.0

2.5

28.4 ± 0.6

27.9 ± 0.3

2.0

0.05
Type 1A : Plunger, thread short

Actuating Force Fa max. (N)

Release Force Fr min (N)

Free Position Pr (mm)

Operating Position Pa (mm)

Over-travel sr min. (mm)

Differential movement sd max. (mm)

5.0

2.5

38.0 ± 0.6

37.5 ± 0.3

5.0

0.05
Type 1A58 : Plunger, thread

Actuating Force Fa max. (N)

Release Force Fr min (N)

Free Position Pr (mm)

Operating Position Pa (mm)

Over-travel sr min. (mm)

Differential movement sd max. (mm)

5.0

2.5

57.2 ± 1.0

56.7 ± 0.3

10.0

0.10
Type 1BL : Toller plunger, thread - Upon request steel roller , transversal roller

Actuating Force Fa max. (N)

Release Force Fr min (N)

Free Position Pr (mm)

Operating Position Pa (mm)

Over-travel sr min. (mm)

Differential movement sd max. (mm)

6.0

3.0

51.3 ± 0.6

50.6 ± 0.3

5.0

0.08
Type 3A : Lever - reverse action - Upon request lever other side

Actuating Force Fa max. (N)

Release Force Fr min (N)

Free Position Pr (mm)

Operating Position Pa (mm)

Over-travel sr min. (mm)

Differential movement sd max. (mm)

4.5

1.5

28.7 ± 1.5

26.8 ± 1.5

3.5

0.50
Type 5AL : Roller lever - reverse action - Upon request lever other side, steel roller, transversal roller

Actuating Force Fa max. (N)

Release Force Fr min (N)

Free Position Pr (mm)

Operating Position Pa (mm)

Over-travel sr min. (mm)

Differential movement sd max. (mm)

4.5

1.5

32.4 ± 1.5

30.0 ± 1.5

3.5

0.50
Type 6AL : Stiff roller lever - reverse action - Upon request lever other side, steel roller, transversal roller

Actuating Force Fa max. (N)

Release Force Fr min (N)

Free Position Pr (mm)

Operating Position Pa (mm)

Over-travel sr min. (mm)

Differential movement sd max. (mm)

4.5

1.5

38.4 ± 1.5

36.0 ± 1.5

3.5

0.50
Type 7A40 : Direct action adjustable lever

Actuating Force Fa max. (N)

Release Force Fr min (N)

Free Position Pr (mm)

Operating Position Pa (mm)

Over-travel sr min. (mm)

Differential movement sd max. (mm)

0.5

0.15

-

-

-

0.70
Type 7AC : Direct action adjustable lever

Actuating Force Fa max. (N)

Release Force Fr min (N)

Free Position Pr (mm)

Operating Position Pa (mm)

Over-travel sr min. (mm)

Differential movement sd max. (mm)

0.2

0.05

-

-

-

3.00
Type 8AL40 : Direct action adjustable roller lever

Actuating Force Fa max. (N)

Release Force Fr min (N)

Free Position Pr (mm)

Operating Position Pa (mm)

Over-travel sr min. (mm)

Differential movement sd max. (mm)

0.5

0.15

-

-

-

0.70

 

 

Standard wiring diagram
Code Actuator Diagram
Direct action

0

1S29

1A

1A58

1BL

7A40

7AC

8AL40
Reverse action

3A

5AL

6AL

 

Ordering information
MP 4 0 - 5AL + MP40-Z

Housing

4 : screw terminal

5 : soldering lugs

Contact material

0 : Silver contact

1 : Gold contact

Actuator

0: Basic switch - pin plunger

1S29 : Plunger

1A : Plunger, thread short

1A58 : Plunger, thread

1BL : Roller plunger, thread

3A : Lever - reverse action

5AL : Roller lever - reverse action

6AL : Stiff roller lever - reverse action

7A40 : Direct action adjustable lever

7AC : Direct action adjustable lever

8AL40 : Direct action adjustable roller lever

 

Option Protection cover  MP40-Z
Be the first to comment!
Read more...
Monday, 06 May 2013 21:22

Microswitch SERIE MP400

Written by

Microswitch SERIES MP400

Standardized small dimension subminiature microswitch. The MP400 serie offers large possibilities of customisation and answers to all targeted inquiries, in terms of housing,connections or actuators. This serie enables you to build your microswitch with your own requirements.

 

Descriptions

Approvals

EN 61058-1

Upon request: UL 61058-1
Housing Glass fiber reinforced
Plunger PES
Membrane Fluorsilicone elastomer
Mechanism Contacts Change-over, Snap action coil spring mechanism with stainless steel spring
Contact material Fine Silver, Gold contact upon request
Termination

Cable or wires in standard and length to be defined

PVC -20°C to 70°C

SI  -40°C to 105°C

PUR -40°c to 90°C

Other cable material and length upon request PTFE, RXL,...
Type of conductor

Flexible conductors

Solder terminal with provisions for securing the conductor by mechanical means and providing circuit continuity by soldering
Cable outlet

Standard side of button

Other side upon request
Actuator Overall dimensions in stainless steel, flat lever , roller, simulated roller
   
Degree of protection

IP67
Class of protection

I          250V

II / III   24V
Pollution degree 3
Proof tracking index PTI 250V
Rated Impulse Withstand Voltage 2.5 kV
Glow-wire temp. 850°C
Micro-disconnection μ
Contact-gap 0.40 mm
Dimensions

DIN 41 635, form B

20 x 16 x 6.5 mm
   

Power rating UL / EN 61058

(Resistive Load)

5RA 250VAC    25'000 cycles

2RA 250VAC    50'000 cycles

0.1RA 24VDC   50'000 cycles
Operating range force 1.0 to 2.5 N, depending actuator
Operating temperature range -40°C to 105°C
Mechanical life 10 x 106

 

 

Standardised Actuator - Upon request other actuator
Type 0 : Pin plunger - without lever

Actuating Force Fa max. (N)

Release Force Fr min (N)

Free Position Pr (mm)

Operating Position Pa (mm)

Over-travel sr min. (mm)

Differential movement sd max. (mm)

2.5

0.5

9.2 ± 0.2

8.7 ± 0.2

0.6

0.05
Type 7JA : Flat lever - position A

Actuating Force Fa max. (N)

Release Force Fr min (N)

Free Position Pr (mm)

Operating Position Pa (mm)

Over-travel sr min. (mm)

Differential movement sd max. (mm

1.0

0.15

12.0 ± 0.4

10.0 ± 0.4

1.2

0.40
Type 7JB : Flat lever - position B

Actuating Force Fa max. (N)

Release Force Fr min (N)

Free Position Pr (mm)

Operating Position Pa (mm)

Over-travel sr min. (mm)

Differential movement sd max. (mm

2.0

0.3

10.3 ± 0.4

9.4 ± 0.4

0.6

0.30
Type 8JAL : Roller - position A

Actuating Force Fa max. (N)

Release Force Fr min (N)

Free Position Pr (mm)

Operating Position Pa (mm)

Over-travel sr min. (mm)

Differential movement sd max. (mm

1.0

0.15

17.3 ± 0.4

15.3 ± 0.4

1.2

0.40
Type 8JBL : Roller - position B

Actuating Force Fa max. (N)

Release Force Fr min (N)

Free Position Pr (mm)

Operating Position Pa (mm)

Over-travel sr min. (mm)

Differential movement sd max. (mm

2.0

0.3

15.9 ± 0.4

15.0 ± 0.4

0.6

0.30
Type 8JGSA : Simulated roller - position A

Actuating Force Fa max. (N)

Release Force Fr min (N)

Free Position Pr (mm)

Operating Position Pa (mm)

Over-travel sr min. (mm)

Differential movement sd max. (mm

1.0

0.15

15.0 ± 0.4

13.0 ± 0.4

1.2

0.40
Type 8JGSB : Simulated roller - position B

Actuating Force Fa max. (N)

Release Force Fr min (N)

Free Position Pr (mm)

Operating Position Pa (mm)

Over-travel sr min. (mm)

Differential movement sd max. (mm

2.0

0.3

13.5 ± 0.4

12.6 ± 0.4

0.6

0.30

 

Standard wiring diagramm
  Diagram Couleur
Direct Action

1 : Brun

2 : Blanc

4 : Vert

 

 

Ordering information
  MP43 0 - 7JA / 325 / 100 PVC

Contact material

0 : Silver contact

1 : Gold contact

                  

Actuator

0: Basic switch - pin plunger

7JA : Flat lever -  A position

7JB : Flat lever  - B position

8JAL : Roller - A position

8JBL : Roller - B position

8JGSA : Simulated Roller - A position

8JGSB : Simulated Roller -  B position

                  

325 : 3 wiring section 0.25 mm2

350 : 3 wiring section 0.50 mm2

                  
Length of cable in centimeter  (cm)                  

Material of cable

PVC: Polyvinyl Chloride

PUR: Polyurethane

SI: Silicone

                  
Be the first to comment!
Read more...
Page 7 of 16

Please publish modules in offcanvas position.