Microswitch SERIES MP500


 

DOWNLOAD DATASHEET

A Subminiature microswitch of standardized small dimensions. The microswitch MP500 series stands out from other products on the market in terms of its mechanical service life and the choice of materials, wich enable it to resist temperatures up to 105 °C (221°F).

 

Descriptions

Approvals

EN 61058-1

UL 61058-1

Housing Glass fiber reinforced
Plunger PES
Membrane Fluorsilicone elastomer
Mechanism Contacts Change-over, Snap action coil spring mechanism with stainless steel spring
Contact material Fine Silver, Gold contact upon request
Termination

Cable PVC -20°C to 105°C (-4°F to 221°F)

Solder terminal -40°C to 105°C (-4°F to 221°F)

PCB -40°C to 105°C (-4°F to 221°F)

Actuator Overall dimensions in stainless steel, flat lever , roller, simulated roller
   
Degree of protection

IP67

Class of protection

I          250V

II / III   24V

Pollution degree 3
Proof tracking index PTI 250V
Rated Impulse Withstand Voltage 2.5 kV
Glow-wire temp. 850°C
Micro-disconnection μ
Contact-gap 0.40 mm
Dimensions

DIN 41 635, form B

20 x 16 x 6.5 mm (0.7874 x 0.6299 x 0.2559 in)

   

Power rating UL / EN 61058

(Resistive Load)

5RA 250VAC    25'000 cycles

2RA 250VAC    50'000 cycles

0.1RA 24VDC   50'000 cycles

Operating range force 1.0 to 2.5 N, depending actuator
Operating temperature range -40°C to 105°C (-40°F to 221°F)
Mechanical life 10 x 106

 

C000 : Solder terminals (mm)  

Flexible conductors to be used.

With provisions for securing the conductor by mechanical means and providing circuit continuity by soldering.

Soldering by hand with a soldering iron.

 

Remark : Avoid overheating as this may damage the switch.

C001 : PCB terminals (mm)  
 
C100 : PVC cable overmould (mm)  
 

 

Actuator

Type L00 : Pin plunger - without lever

Actuating Force Fa max. (N)

Release Force Fr min (N)

Free Position Pr (mm)  /  (in)

Operating Position Pa (mm)  /  (in)

Over-travel sr min. (mm)  /  (in)

Differential movement sd max. (mm)  /  (in)

2.5

0.5

9.2 ± 0.2  /  0.3622 ± 0.0079

8.7 ± 0.2  /  0.3425 ± 0.0079

0.6  /  0.0236

0.05  /  0.0020

Type L70 : Flat lever - position A

Actuating Force Fa max. (N)

Release Force Fr min (N)

Free Position Pr (mm)  /  (in)

Operating Position Pa (mm)  /  (in)

Over-travel sr min. (mm)  /  (in)

Differential movement sd max. (mm)  /  (in)

1.0

0.15

12.0 ± 0.4  /  0.4724 ± 0.0157

10.0 ± 0.4  /  0.3937 ± 0.0157

1.2  /  0.0472

0.40  /  0.0157

Type L71 : Flat lever - position B

Actuating Force Fa max. (N)

Release Force Fr min (N)

Free Position Pr (mm)  /  (in)

Operating Position Pa (mm)  /  (in)

Over-travel sr min. (mm)  /  (in)

Differential movement sd max. (mm)  /  (in)

2.0

0.3

10.3 ± 0.4  /  0.4055 ± 0.0157

9.4 ± 0.4  /  0.3701 ± 0.0157

0.6  /  0.0236

0.30  /  0.0118

Type L80 : Roller - position A

Actuating Force Fa max. (N)

Release Force Fr min (N)

Free Position Pr (mm) / (in)

Operating Position Pa (mm) / (in)

Over-travel sr min. (mm) / (in)

Differential movement sd max. (mm) / (in)

1.0

0.15

17.3 ± 0.4  /  0.6811 ± 0.0157

15.3 ± 0.4  /  0.6024 ± 0.0157

1.2  /  0.0472

0.40  /  0.0157

Type L81 : Roller - position B

Actuating Force Fa max. (N)

Release Force Fr min (N)

Free Position Pr (mm) / (in)

Operating Position Pa (mm) / (in)

Over-travel sr min. (mm) / (in)

Differential movement sd max. (mm) / (in)

2.0

0.3

15.9 ± 0.4  /  0.6260 ± 0.0157

15.0 ± 0.4  /  0.5906 ± 0.0157

0.6  /  0.0236

0.30  /  0.0118

Type L85 : Simulated roller - position A

Actuating Force Fa max. (N)

Release Force Fr min (N)

Free Position Pr (mm)  /  (in)

Operating Position Pa (mm)  /  (in)

Over-travel sr min. (mm)  /  (in)

Differential movement sd max. (mm)  /  (in)

1.0

0.15

15.0 ± 0.4  /  0.5906 ± 0.0157

13.0 ± 0.4  /  0.5118 ± 0.0157

1.2  /  0.0472

0.40  /  0.0157

Type L86 : Simulated roller - position B

Actuating Force Fa max. (N)

Release Force Fr min (N)

Free Position Pr (mm)  /  (in)

Operating Position Pa (mm)  /  (in)

Over-travel sr min. (mm)  /  (in)

Differential movement sd max. (mm)  /  (in)

2.0

0.3

13.5 ± 0.4  /  0.5315 ± 0.0157

12.6 ± 0.4  /  0.4961 ± 0.0157

0.6  /  0.0236

0.30  /  0.0118

 

 

Standard wiring diagram
    Switching diagram  

Solder terminal

PCB

C000

C001

PVC cable C10. / C20.

1 - Black

2 - Grey

4 - Blue

 

 

 

Ordering information
  MP5 0 0 - L70 - C100

Housing

0 : IP67 with membrane

5 : IP40 without membrane

             

Contact material

0 : Silver contact

1 : Gold contact

             

Actuator

0: Basic switch - pin plunger

L70 : Flat lever -  A position

L71 : Flat lever  - B position

L80 : Roller - A position

L81 : Roller - B position

L85 : Simulated Roller - A position

L86 : Simulated Roller -  B position

             

Terminals

C000 : Solder

C001 : PCB

C100 : Cable PVC, 3x0.25 mm2, 250VAC 2A  0.5 (m) / 19.69 (in)

C101 : Cable PVC, 3x0.25 mm2, 250VAC 2A  1 (m) / 39.37 (in)

C102 : Cable PVC, 3x0.25 mm2, 250VAC 2A  2 (m) / 78.74 (in)

C200 : Cable PVC, 3x0.50 mm2, 250VAC 5A  0.5 (m) / 19.69 (in)

C201 : Cable PVC, 3x0.50 mm2, 250VAC 5A  1 (m) / 39.37 (in)

C202 : Cable PVC, 3x0.50 mm2, 250VAC 5A  2 (m) / 78.74 (in)

             
logo