altEMP-Protectors PLP Series

The PLP-Series consists of highly effective EMP Surge Protection Filter Devices (SPD's) for NEMP / HEMP / EMP protection as well as for lightning surge protection according to IEC class I+II+III.PLP-series SPD's are surge protection filters designed for feed-through installation into a bulkhead such as the metallic wall of a shielded room. This makes PLP-series SPD's to work simultaneously as protection against transient overvoltage surges as well as an excellent EMC-solution against conducted high frequency disturbances.  

PLP-Series products are threat-level HEMP-tested according to MIL-STD-188-125. Additonally the PLP-series is approved against the mechanical shock of a 3 bar blast according to Swiss Federal Office for Civil Protection (BABS, formerly BZS) and is therefore especially suited to protect fixed facilities. 

PLP-44041 3-phase 40A Powerline Protection PLP-44041 is a very effective EMP-Protector / Filter to protect a three phase 400/230V AC power supply with operating current up to 40A per phase. PLP-44041 combines NEMP / HEMP-protection with lightning surge protection IEC class I+II+III and an EMC filter having very high attenuation up to GHz range.For safety reasons (relatively high AC-leakage current) PLP-44041 is only suited for installations with permanent ground connection.
PLP-44041 datasheet



PLP-44101 3-phase 100A Powerline Protection

PLP-44101 is a very effective EMP-Protector / Filter to protect a three phase 400/230V AC power supply with operating current up to 100A per phase. PLP-44101 combines NEMP / HEMP-protection with lightning surge protection IEC class I+II+III and an EMC filter having very high attenuation up to GHz range.For safety reasons (relatively high AC-leakage current) PLP-44101 is only suited for installations with permanent ground connection. 
PLP-44101 datasheet

PLP-44201 3-phase 200A Powerline Protection

PLP-44201 is a very effective EMP-Protector / Filter to protect a three phase 400/230V AC power supply with operating current up to 200A per phase. PLP-44201 combines NEMP / HEMP-protection with lightning surge protection IEC class I+II+III and an EMC filter having very high attenuation up to GHz range.For safety reasons (relatively high AC-leakage current) PLP-44201 is only suited for installations with permanent ground connection. 
PLP-44201 datasheet

PLP-44401 3-phase 400A Powerline Protection

PLP-44401 is a very effective EMP-Protector / Filter to protect a three phase 400/230V AC power supply with operating current up to 400A per phase. PLP-44401 combines NEMP / HEMP-protection with lightning surge protection IEC class I+II+III and an EMC filter having very high attenuation up to GHz range.For safety reasons (relatively high AC-leakage current) PLP-44401 is only suited for installations with permanent ground connection.  Caution: PLP-44401 is not a current compensated filter, it consists of two cases, one for L1 / L2 and one for L3 / N. 
PLP-44401 datasheet

PLP-44801 3-phase 800A Powerline Protection

PLP-44801 is a very effective EMP-Protector / Filter to protect three phase 400/230V AC power with operating current up to 800A per phase. PLP-44801 combines NEMP / HEMP-protection with lightning surge protection IEC class I+II+III and an EMC filter having very high attenuation up to GHz range. For safety reasons (relatively high AC-leakage current) PLP-44801 is only suited for installations with permanent ground connection.  Caution: PLP-44801 is not a current compensated filter, it consists of four cases, one for each L1, L2, L3, and N.  PLP-44801 datasheet

PLP-44011 3-phase 1000A Powerline Protection PLP-44011 is a very effective EMP-Protector / Filter to protect a three phase 400/230V AC power supply with operating current up to 1000A per phase. PLP-44011 combines NEMP / HEMP-protection with lightning surge protection IEC class I+II+III and an EMC filter having very high attenuation up to GHz range.For safety reasons (relatively high AC-leakage current) PLP-44011 is only suited for installations with permanent ground connection.  Caution: PLP-44011 is not a current compensated filter, it consists of four cases, one for each L1, L2, L3, and N. 
PLP-44011 datasheet

logo