* 
Products (213)
Stepper Motor Control Circuits
We are proud to be a full stocking distributor for LSI/CSI. Click here to download the LSI/CSI Short form Catalog. ICs that make products better
that extend from the consumer and industrial marketplace to military and aerospace applications.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Amphenol Canada -Strip Connectors
|
The Amphenol microminiature contact system employs a precision stamped and formed pin contact recessed within the plug insulator. The socket contact is a precision fabricated tube. Pin and socket contacts are epoxy retained in high-grade thermoplastic insulators. The contact system has proven reliability, exceeding the performance specifications of MIL-DTL-83513. Terminations are available in a broad range including solder cup, terminated to wire harness, vertical and right angle PCB. Plastic and metal shell versions are available, in a broad range of shell finishes. A broad range of mounting hardware is available (jackscrews, posts, guide pins) as well as straight and angled back-shells. |
FEATURES AND BENEFITS
|
Surface Mount Resistor Networks
High-Reliability products for Military / Aerospace/ Communicatuion / OEM Applications
JEDEC PACKAGES
|
Size Code |
Length |
Width |
Thickness |
I/O Count |
Watts Per Resistor* |
Watts Per Package |
Max Voltage |
|
SJCA |
.300 |
.300 |
0.030 |
16 |
0.05-0.10 |
0.08 |
50 |
|
SJCB |
.350 |
.350 |
0.030 |
20 |
0.05-0.10 |
1.0 |
50 |
SLAMDIP PACKAGES
|
Size Code |
Length |
Width |
Thickness |
I/O Count |
Watts Per Resistor* |
Watts Per Package |
Max Voltage |
|
SD15 |
.150 |
.410 |
0.030 |
16 |
0.05-0.10 |
0.8 |
50 |
|
SD20 |
.200 |
.410 |
0.030 |
16 |
0.05-0.10 |
0.8 |
50 |
Nominal measurements are in inches.
Thank you!
Thank you for participating in our customer satisfaction survey.
Your feedback will help us identify areas of improvement for our company.
Sinccerely,
Gemini Electronics
Sales & Marketing Team
Testing and Screening Mil-Spec Component
Written by Peter Lyons HallTesting and Screening
Mil-Spec Components
We offer a broad spectrum of value added testing services. We partner with several independent test labs. Our value added testing and screening capabilities are being utilized more frequently. Some of the reasons for this include :
- Obsolescence of mil spec devices.
- Customer drawing requirements specify selected parameters.
- Re-screening requirements
- Concern over influx of counterfeit parts from China
Here are examples of the testing services we offer:
- Group A & B
- Basic electricals
- Burn in
- Bond Pull and Die Shear
- Full blown MIL screening or re-screening to JANTX and 883 Level*
- Steam Aging and Solderability Test Stations
- Solder Tinning & Lead Cleaning
- PIND (Particle Impact Noise Detection)
- Constant Acceleration (Centrifuge)
- Marking and Resistance to Solvent Test
- Optical Microscope Systems for Internal Visual Inspection (Failure Analysis)-SEM
- Hermeticity Seal Detection (Fine and Gross)
- Pressurization System for Gross (Fluorocarbon) and Fine (Helium)
- Leak Detection
*Note: All screening of semiconductors to military specifications is performed at a DSCC- VQC NILL-STD 883 certified lab. In addition to semiconductors we also offer testing on relays for their basica electrical performance and cable assmblies to ensure continuity, insulation resistance, and dielectric breakdown.
Thick Film Jumpers
High-Reliability products for Military / Aerospace/ Communicatuion / OEM Applications
For circuts with a small number of crossovers, a jumper chip can be more economical than printing a dielectric layer and crossover conductor or using a thru-hole. Thick film jumpers are available in five sizes, all with wraparound terminations and glass passivation on a portion of the top surface. The CP chip type has platinum/silver terminations for conductive epoxy bonding, and the CPX type has pretinned nickle barrier terminations for solder applications. PLEASE CONTACT US FOR PRICE AND DELIVERY!
Resistance |
|||||
|
.2ohm |
|||||
|
.2ohm |
|||||
|
.2ohm |
|||||
|
1003 |
.100 |
.025 |
.015 |
.2ohm |
|
|
.2ohm |
Thin Film High-Frequency Resistors
High-Reliability products for Military / Aerospace/ Communicatuion / OEM Applications
| Solder Bump |
Rating |
|||||
|
25mw |
|||||
|
40mw |
|||||
|
50mw |
|||||
|
50mw |
|||||
|
75mw |
|||||
|
50mw |
|||||
|
125mw |
|||||
|
100mw |
|||||
|
200mw |
|||||
|
200mw |
|||||
|
500mw |
|||||
|
300mw |
Nominal measurements are in inches.
Thin Film on Silicon Resistors
High-Reliability products for Military / Aerospace/ Communicatuion / OEM Applications
| Center Tap |
|
Size Code
|
Length
|
Width
|
Thickness
|
Bond Pad
|
Power Rating (mW)
|
Voltage Rating (V)
|
Download Available
|
|
0202
|
.020
|
.020
|
.010
|
.005
|
100
|
100
|
|
|
0303
|
.030
|
.030
|
.010
|
.005
|
250
|
100
|
|
|
0404
|
.040
|
.040
|
.010
|
.005
|
350
|
100
|
|
|
0505
|
.050
|
.050
|
.010
|
.005
|
500
|
100
|
Thin Film Power Moisture Resistors
High-Reliability products for Military / Aerospace/ Communicatuion / OEM Applications
|
20mW |
|||||
|
50mW |
|||||
|
100mW |
|||||
|
100mW |
|||||
|
250mW |
|||||
|
150mW |
|||||
|
2208 |
.225 |
.075 |
.025 |
40V |
225mW |
|
1010 |
.100 |
.100 |
.015 |
40V |
500mW |
|
800mW |
|||||
|
1000mW |
Nominal measurements are in inches.
Metal Foil Resistors - Through Hole, RNC 90
Wilbrecht LEDCO, inc' metal foil resistors are constructed to reliably meet the tightest temperature coefficients and resistance tolerances while providing long term stability in high reliability applications.
We offer a TCR of ± 2.5 ppm/°C over the range - 55°C to +125°C and resistance tolerances to 0.005%. Our resistors have less than a 0.2% resistance change over 10,000 hours at rated temperatures and power.
The resistor's unique two-wire lead construction abates mechanical stresses and provides increased protection against vibration in military and aerospace applications. All production is documented to QPL standards.
| Series | Descriptions |
| Series WA and WB |
These commercial grade metal foil resistors provide extreme stability for A/D circuits. |
|
Series WQ and WT |
These close tolerance metal foil resistors are approved for MIL-PRF-55182/RNC90 (R Level) |
|
Series WN |
The WN Series is qualified to the NASA S-311-P-813 specification. |
More...
Amphenol Canada - Twinax, Triax Contacts
|
|
FEATURES AND BENEFITS
|
| PERFORMANCE SPECIFICATIONS FOR ARINC 600 | ||||
| Size 1 Socket and Pin (Crimp) | Size 5 Socket and Pin (Crimp) | Size 8 Socket & Pin (Crimp) 75 Ohm | Size 8 Socket & Pin (Crimp) 50 Ohm | |
| Temperature Range: | -65°C to +165°C | -65°C to +185°C | -65°C to +125°C | -65°C to +125°C |
| Impedance: | 50 Ohms nominal | 50 Ohms nominal | 75 Ohms nominal | 50 Ohms nominal |
| Rated Voltage: | 1,000 Vrms at sea level | 325 Vrms at sea level | 325 Vrms at sea level | 325 Vrms at sea level |
| Frequency Range: | 0-8 GHz | 0-500 MHz 1500-1700 MHz |
0-500 MHz | 0-500 MHz |
| VSWR: | 1.70:1 | 0-500 MHz VSWR 1-30: 1 1500-1700 MHz VSWR 1.50:1 |
1-30: 1 | 1-30: 1 |
| Insertion Loss: | 0.3 dB | 0.3 dB | ||
| Contact Resistance: | 0.2 mΩ (body) | 1.0 mΩ (body) | 1.5 mΩ max (outer body) | Outer body 12.0 Amp test current, 30 mΩ intial, 45 mΩ after test |
| 1.0 mΩ (center) | 2.1 mΩ (center) | 10 mΩ max (center) | Center contact 1.0 Amp test current, 15 mΩ intial, 30 mΩ after test | |
| Insulation Resistance: | 5,000 megohms mininum | 5,000 megohms mininum | 5,000 megohms mininum | 5,000 megohms mininum |
| Dielectric Withstand Voltage(DWV): | 2,500 Vrms at sea level | 750 Vrms at sea level | 750 Vrms at sea level | 1,000 Vrms at sea level |
| MATERIAL SPECIFICATIONS: | ||||
| Size 1 Socket and Pin (Crimp) | Size 5 Socket and Pin (Crimp) | Size 8 Socket & Pin (Crimp) 75 Ohm | Size 8 Socket & Pin (Crimp) 50 Ohm | |
| Body Components: | Brass 1/2 HD per QQ-B-626 Beryllium per QQ-C-530 |
Brass 1/2 HD per QQ-B-626 Beryllium per QQ-C-530 |
Beryllium copper per ASTM-B-196 | Copper alloy |
| Insulators: | Per MIL-P 19468A | Per MIL-P 19468A | PTFE per ASTM-D-1710 | TFE per ASTM-D-1710-99 or equivalent |
| Crimp Ferrule: | Copper, annealed | Copper, annealed | Brass per QQ-B-626 | Copper alloy or brass per ASTM B-16 |
| Center Contact: | Brass per QQ-B-626 | Beryllium copper per ASTM-B-196 or copper alloy | ||
| Gaskets: | Silicone rubber per ZZ-R-765 | Silicone rubber per ZZ-R-765 | Silicone rubber per ZZ-R-765 | |
| Plating: | Gold per MIL-G-45204 | Gold per MIL-G-45204 | Gold per AMS per 2422, 50 microinches, minimum over 50 microinches nickel underplate per QQ-N-290 | Gold per AMS 2422, 50 microinches minimum over 50 microinches minimum nickel underplate per QQ-N-290 |
Wilbrecht / LEDCO (now owned by VCC)
Wilbrecht LEDCO, recently acquired by VCC), LED Indicators lights meet the highest standards for quality and consistent uniformity including RoHS Compliant Components. Wilbrecht LEDCO offers vertically integrated design, engineering, manufacturing, and assembly capabilities. In addition to industry standard assemblies, Wilbrecht LEDCO can work with you from product concept to production for special applications. Wilbrecht LEDCO bar products offer design flexibility without tooling charges. Virtually any combination of colors and LED type can be assembled to your specifications. RoHS Compliant LED, incandescent, and neon indicator lights for PCB and panel mounting are readily available for new and retrofit applications.
| PCB Mount LED Strips & Arrays |
Our board mount LEDs are customized to you specifications. Our UL 94V-0 rated bars provide a consistent alignment for multilple LED mountings. |
| Panel Mount / Snap-In LED Indicators |
LED Available for multiple panel thicknesses. Our simplified one-piece construction and snap-in assembly feature requires no mounting hardware. |
| LED Panel-Mount Screw-On | LED Metal housing for front and rear mounting. Optional sealing against moisture and dust. |
| Available in multiple colors and lens styles these LEDs provide 180 degree visibility for optimum optics. Meets MIL-E-5400 specs. |
Wilbrecht LEDCO announces 120/240 VAC Panel Mount LEDs for Power Indication
Written by Peter Lyons HallWilbrecht LEDCO announces 120/240 VAC Panel Mount LEDs for Power Indication (acquired by VCC)
Wilbrecht LEDCO, Inc. introduces bipolar LEDs in its range of panel mount LED’s in varied housing styles for front or rear panel mounting in response to international demand.
The pre-wired assembly of a red, green or yellow bipolar LED and a resistor will work directly off a 120 VAC or 240 VAC line as a LED power indicator or as a drop-in replacement for neon indicators.
Front mount housing options include the 100/600 series domed cylindrical and flush plastic lenses, or the rugged CR/BR/CC series screw on metal housings for 0.312
WILBRECHT LEDCO (acquired by VCC)
LED INDICATORS:
Wilbrecht LEDCO LED Indicators lights meet the highest standards for quality and consistent uniformity including RoHS Compliant Components. LEDCO offers vertically integrated design, engineering, manufacturing, and assembly capabilities. In addition to industry standard assemblies, LEDCO can work with you from product concept to production for special applications. LEDCO bar products offer design flexibility without tooling charges. Virtually any combination of colors and LED type can be assembled to your specifications.
- Wilbrecht LEDCO PCB Mount LEDs
- Wilbrecht LEDCO Panel-Mount / Snap-In
- Wilbrecht LEDCO Panel-Mount / Screw-On
- Wilbrecht LEDCO Neon / Incandescent Panel-Mount