* 
Peter Lyons Hall
Thick Film Jumpers
High-Reliability products for Military / Aerospace/ Communicatuion / OEM Applications
For circuts with a small number of crossovers, a jumper chip can be more economical than printing a dielectric layer and crossover conductor or using a thru-hole. Thick film jumpers are available in five sizes, all with wraparound terminations and glass passivation on a portion of the top surface. The CP chip type has platinum/silver terminations for conductive epoxy bonding, and the CPX type has pretinned nickle barrier terminations for solder applications. PLEASE CONTACT US FOR PRICE AND DELIVERY!
Resistance |
|||||
|
.2ohm |
|||||
|
.2ohm |
|||||
|
.2ohm |
|||||
|
1003 |
.100 |
.025 |
.015 |
.2ohm |
|
|
.2ohm |
High Value Thick Film Chip Resistors
High-Reliability products for Military / Aerospace/ Communicatuion / OEM Applications
Gemini Electronic Components offers a complete range of High Value Thick Film Chip Resistors as shown below. PLEASE CONTACT US FOR PRICE AND DELIVERY!
| Pretinned NI Barrier | Gold Wire Bondable |
(100M to 1Gohm) (1Gohm and up) |
Maximum |
||||||
|
12V |
|||||||
|
12V |
|||||||
|
18V |
|||||||
|
30V |
|||||||
|
35V |
|||||||
|
50V |
|||||||
|
70V |
|||||||
|
95V |
|||||||
High Voltage Thick Film Chip Resistors
High-Reliability products for Military / Aerospace/ Communicatuion / OEM Applications
Gemini Electronic Components offers a complete range of High Voltage Thick Film Chip Resistors as shown below. PLEASE CONTACT US FOR PRICE AND DELIVERY!
Rating |
Rating |
Resistance |
|||||
|
22.5K |
|||||||
|
20.0K |
|||||||
|
20.8K |
|||||||
|
12.5K |
High Power Thick Film Chip Resistors
High-Reliability products for Military / Aerospace/ Communicatuion / OEM Applications
Gemini Electronic Components offers a complete range of High Power Thick Film Chip Resistors as shown below. PLEASE CONTACT US FOR PRICE AND DELIVERY!
| Ground Isolation | Single Wrap Around |
| Metallized Bottom | Metallized Bottom |
Rating |
Rating |
Thermal |
||||
|
10W |
||||||
|
4W |
||||||
|
14W |
||||||
|
14W |
||||||
|
20W |
||||||
|
30W |
||||||
|
50W |
||||||
|
100W |
||||||
|
150W |
||||||
|
200W |
Standard Thick-Film Chip Resistors
High-Reliability products for Military / Aerospace/ Communicatuion / OEM Applications
Gemini Electronic Components offers a complete range of Thick Film Resistors as shown below. PLEASE CONTACT US FOR PRICE AND DELIVERY!
| Wraparound | Gold Wire Bondable | Metallized Bottom | One Side Wraparound |
|
Thermal
Resistance (°C/W) |
|||||||
|
67.7
|
|||||||
|
83.2
|
|||||||
|
56.3
|
|||||||
|
45.2
|
|||||||
|
85.3
|
|||||||
|
61.5
|
|||||||
|
45.5
|
|||||||
|
78.4
|
|||||||
|
62.9
|
|||||||
|
81.5
|
|||||||
|
39.2
|
|||||||
|
77.1
|
|||||||
|
90.2
|
|||||||
|
48.4
|
|||||||
|
72.7
|
|||||||
|
44.5
|
Nominal measuements are in inches.
Size 0504 is not available in Type A.
Size 0705 is usually the most economical. Its use is recommended except where its size is excessive or where power and/or voltage may be exceeded.
MIL-PRF-55342 Thick-Film Chip Resistors
High-Reliability products for Military / Aerospace/ Communicatuion / OEM Applications
Gemini Electronic Components offers a complete range of QPL MIL_PRF-M55342 qualified Thick Film Resistors. PLEASE CONTACT US FOR PRICE AND DELIVERY!
| Solderable Nickel Barrier | Epoxy Bondable | Gold Wire Bondable |
Available |
||||||
XSIS CRYSTAL OSCILLATORS
High-Reliability Hybrid Microcircuit Crystal Oscillators for Military / Aerospace/ Communicatuion / OEM Applications
Gemini Electronic Components crystal Oscillators are qualified and production tested to specification defined under MIL-PRF-55310 to ensure the highest possible quality. These products are used in a wide range of of military, aerospace communication and OEM Applications. PLEASE CONTACT US FOR PRICE AND DELIVERY!
|
Type
No. |
Supply
Voltage |
Output
Type |
Output
Enable |
Frequency
Range |
Package
Outline |
| XC5A |
5.0 VDC
|
HCMOS/TTL
|
YES
|
1.0 MHz - 105.0 MHz
|
5 x 7 mm
 Lead Less |
| XC5L |
3.3 VDC
|
HCMOS/TTL
|
YES
|
1.0 MHz - 200.0 MHz
|
|
| XC5N |
2.5 VDC
|
HCMOS
|
YES
|
1.0 MHz - 190.0 MHz
|
|
| XC5R |
1.8 VDC
|
HCMOS
|
YES
|
1.0 MHz - 160.0 MHz
|
|
| XE40-100 |
5 VDC
|
TTL
|
Yes
|
400 KHz to 90 MHz
|
9 x 7 mm
 "J" Leads |
| XE40-200A |
5 VDC
|
HC/ACMOS
|
Yes
|
400 KHz to 90 MHz
|
|
| XE40-L00A |
3.3 VDC
|
HC/ACMOS/TTL
|
Yes
|
400 KHz to 100 MHz
|
|
| XE30-100 |
5 VDC
|
TTL
|
Yes
|
400 KHz to 90 MHz
|
9 x 14 mm
 "J" Leads |
| XE30-200A |
5 VDC
|
HC/ACMOS
|
Yes
|
400 KHz to 90 MHz
|
|
| XE30-L00A |
3.3 VDC
|
HC/ACMOS/TTL
|
Yes
|
400 KHz to 100 MHz
|
|
| X100 |
5 VDC
|
TTL
|
Yes
|
60 Hz to 90 MHz
|
14 Pin DIP
 |
| M100 |
5 VDC
|
TTL
|
No
|
60 Hz to 90 MHz
|
|
| E100 |
5 VDC
|
TTL
|
No
|
60 Hz to 90 MHz
|
|
| X200A |
5 VDC
|
HC/ACMOS
|
Yes
|
5 Hz to 90 MHz
|
|
| X3200 |
3.3 VDC
|
HC/ACMOS/TTL
|
Yes
|
100 KHz to 100 MHz
|
|
| XL00 |
3.3 VDC
|
HC/ACMOS/TTL
|
Yes
|
100 KHz to 100 MHz
|
|
| X200 |
5 to 15 VDC
|
CMOS
|
No
|
1.5Hz to 12 MHz
|
14 Pin DIP
|
| M200 |
5 to 15 VDC
|
CMOS
|
No
|
1.5Hz to 12 MHz
|
|
| E200 |
5 to 15 VDC
|
CMOS
|
No
|
1.5Hz to 12 MHz
|
|
| T100 |
5 VDC
|
TTL
|
Yes
|
60 Hz to 90 MHz
|
4 Pin DIP
 |
| T200 |
5 to 15 VDC
|
CMOS
|
No
|
1.5 Hz to12 MHz
|
|
| T200A |
5 VDC
|
HC/ACMOS
|
Yes
|
5 Hz to 90 MHz
|
|
| T3200 |
3.3 VDC
|
HC/ACMOS/ TTL
|
Yes
|
100 KHz to 100 MHz
|
|
| XE20-100 |
5 VDC
|
TTL
|
Yes
|
400 KHz to 90 MHz
|
TO (Round)
 |
| XE20-200A |
5 VDC
|
HC/ACMOS
|
Yes
|
400 K Hz to 90 MHz
|
|
| XE20-L00A |
3.3 VDC
|
HC/ACMOS/TTL
|
Yes
|
400 KHz to 100 MHz
|
|
| XE10-100 |
5 VDC
|
TTL
|
Yes
|
400 KHz to 90 MHz
|
LCC
 Surface Mount |
| XE10-200A |
5 VDC
|
HC/ACMOS
|
Yes |
400 KHz to 90 MHz
|
|
| XE10-3200 |
3.3 VDC
|
HC/ACMOS
|
Yes |
400 KHz to 100 MHz
|
|
| XE101-100 |
5 VDC
|
TTL
|
Yes
|
400 KHz to 90 MHz
|
"J" Leads
 Surface Mount |
| XE101-200A |
5 VDC
|
HC/ACMOS
|
Yes
|
400 KHz to 90 MHz
|
|
| XE101-3200 |
3.3 VDC
|
HC/ACMOS
|
Yes
|
400 KHz to 100 MHz
|
|
| XE102-100 |
5 VDC
|
TTL
|
Yes
|
400 KHz to 90 MHz
|
Gull Wing Leads
 Surface Mount |
| XE102-200A |
5 VDC
|
HC/ACMOS
|
Yes
|
400 KHz to 90 MHz
|
|
| XE102-3200 |
3.3 VDC
|
HC/ACMOS
|
Yes
|
400 KHz to 100 MHz
|
|
| X300 |
-5.2 VDC
|
ECL
|
No
|
10.0 to 240 MHz
|
14 Pin DIP
|
| X300A |
-4.5 VDC
|
ECL
|
No
|
10.0 to 240 MHz
|
|
| T300 |
-5.2 VDC
|
ECL
|
No
|
10.0 to 240 MHz
|
4 Pin DIP
|
| T300A |
-4.5 VDC
|
ECL
|
No
|
10.0 to 240 MHz
|
Our Crystal Oscillators are derived from MIL-PRF-55310 and are qualified on a sampling basis to insure that all units meet or exceed the required specifications. This sampling method, coupled with Workmanship Standards to MIL-PRF-38534, a Product Assurance Plan in accordance with MIL-STD-790 and a Quality System certified to ISO-9001, insures continued deliver of highquality Crystal Oscillator product. These tests include :
| VIBRATION | 0.06" DA, 30G Peak, 10 - 2000 Hz, MIL-STD-202, Method 204, Cond. G | |
| SHOCK | 1/2 Sine, 1500G Peak, MIL-STD-883, Method 2002, Cond. B | |
| THERMAL SHOCK | MIL-STD-202, Method 107, Cond. B | |
| ALTITUDE | MIL-STD-202, Method 105, Cond. C | |
| MOISTURE RESISTANCE | MIL-STD-202, Method 106, Vibration Sub cycle Omitted | |
| SALT SPRAY | MIL-STD-883, Method 1009, Cond. A | |
| CONSTANT ACCELERATION | MIL-STD-883, Method 2001, 5000G | |
| SOLDERABILITY | MIL-STD-202, Method 208 | |
| RESISTANCE TO SOLDERING HEAT | MIL-STD-202, Method 210, Cond. C or B as Applicable | |
| RESISTANCE TO SOLVENTS | MIL-STD-202, Method 215 | |
| INTERNAL WATER VAPOR CONTENT | MIL-STD-883, Method 1018 |
XSIS QPL | M55310 OSCILLATORS
Qualified Product List (QPL) Oscillators are quartz crystal oscillator products that are built to meet MIL-PRF-55310
Gemini Electronic Components selection of MIL-PRF-55310 QPL Oscillators have been subjected to formal QPL qualification under MIL-PRF-55310 for a wide range of military, commuunication and OEM Applications. PLEASE CONTACT US FOR PRICE AND DELIVERY!
| Type Number |
Supply Voltage |
Output Type |
Output Enable |
Frequency Range | Package Outline |
| M55310/08 (contact us for datasheet) |
5.0 VDC | TTL | No | 100.0 Hz - 50.0 MHz | 14 Pin DIP |
| M55310/09 |
5.0 VDC | TTL | No | 400.0 KHz - 60.0 MHz | 8 Pin Round |
| M55310/11 |
5 to 15 VDC | CMOS | No | 50 KHz - 10.0 MHz | 14 Pin DIP |
| M55310/14 |
5.0 VDC | TTL | No | 100.0 Hz - 25.0 MHz | 14 Pin DIP |
| M55310/15 |
5 to 15 VDC | CMOS | No | 5.25 Hz - 10.0 MHz | 14 Pin DIP |
| M55310/16 |
5.0 VDC | TTL | No | 100.0 Hz - 80.0 MHz | 14 Pin DIP |
| M55310/17 |
5.0 VDC | TTL (GATED) | Yes | 250.0 KHz - 50.0 MHz | 14 Pin DIP |
| M55310/18 |
5 to 15 VDC | CMOS | No | 5.25 Hz - 15.0 MHz | 14 Pin DIP |
| M55310/19 |
5.0 VDC | TTL | No | 1.0 MHz - 60.0 MHz | .485"Sq. LCC |
| M55310/26 |
5.0 VDC | HCMOS | No | 10.0 KHz - 65.0 MHz | 14 Pin DIP |
| M55310/26 |
5.0 VDC | HCMOS | No | 10.0 KHz - 65.0 MHz | 4 Pin DIP |
| M55310/27 |
5.0 VDC | HCMOS | Yes | 1.0 MHz - 85.0 MHz | 9x14mm "J" Leads |
| M55310/30 |
3.3 VDC | HCMOS | Yes | 450.0 KHz - 85.0 MHz | 9x14mm "J" Leads |
Our MIL-PRF-55310 Crystal Oscillators are derived from MIL-PRF-55310 and are qualified on a sampling basis to insure that all units meet or exceed the required specifications. This sampling method, coupled with Workmanship Standards to MIL-PRF-38534, a Product Assurance Plan in accordance with MIL-STD-790 and a Quality System certified to ISO-9001, insures continued deliver of highquality Crystal Oscillator product. These tests include :
| VIBRATION | 0.06" DA, 30G Peak, 10 - 2000 Hz, MIL-STD-202, Method 204, Cond. G | |
| SHOCK | 1/2 Sine, 1500G Peak, MIL-STD-883, Method 2002, Cond. B | |
| THERMAL SHOCK | MIL-STD-202, Method 107, Cond. B | |
| ALTITUDE | MIL-STD-202, Method 105, Cond. C | |
| MOISTURE RESISTANCE | MIL-STD-202, Method 106, Vibration Sub cycle Omitted | |
| SALT SPRAY | MIL-STD-883, Method 1009, Cond. A | |
| CONSTANT ACCELERATION | MIL-STD-883, Method 2001, 5000G | |
| SOLDERABILITY | MIL-STD-202, Method 208 | |
| RESISTANCE TO SOLDERING HEAT | MIL-STD-202, Method 210, Cond. C or B as Applicable | |
| RESISTANCE TO SOLVENTS | MIL-STD-202, Method 215 | |
| INTERNAL WATER VAPOR CONTENT | MIL-STD-883, Method 1018 |
Administrators of the website may log-in here.
EBG offers the totally encapsulated and insulated TO-247 package for low ohmic value and non-inductive design for high frequency and pulsing applications. Ideal use is for power supplies. This series is rated at 100 Watts mounted to a heat sink.
The special features include :
• 100 Watt power rating at 25°C case temperature
• TO-247 package configuration
• Single screw mounting simplifies attach-ment to the heat sink.
• A totally molded housing for enviromental protection.
• Non-Inductive design
• Resistor package totally insulated from heat sink.