* 
ADI acquires the NewVac and DCX divisions from DCX-Chol Enterprises
Displaying items by tag: limit switch
Limit switch SERIE MP800
MICROPRECISION SERIES MP800
The limit switch family MP800 of safety and limit switches with their metal or plastic housing are ideally suited to application where precise shutdown is required. For example when the positions of doors and access hatches are monitored.
They can be used in safety circuits as the NC contact is positively-opening in compliance with IEC 60 947-5-1.
|
Descriptions |
| MP800-MP810-MP850 | MP820-MP830-MP870 | ||
| Approval | IEC 947-5-1 | ||
| Housing | Thermoplastic | Metal | |
| Mechanism |
Forced break Slow action - Snap action |
Forced break Slow action - Snap action |
|
| Circuit | 1NO + 1NC / 2NC / 2NO+1NC / 1NO+2NC / 3NC | ||
| Termination | PG13.5 / 1/2" NPT / PG11 / M16 / M20 | ||
| Actuator | Variety of operation heads | ||
| Degree of protection | IP65 | IP66 | |
| Power rating |
AC-15 3A DC-13 0.27A |
||
| Thermal current | 10A | 10A | |
| Dimensions |
EN 50 047 30 mm / 50 mm EN 50 041 40 mm |
||
| Operating temperature range | -25°C to +70°C | ||
| Mechanical life | 30 x 106 | ||
Limit switch SERIE MP700
Limit switch SERIE MP700
A sealed position switch, with positive opening operation, dual breaking, with direct connection by cable moulded into the housing. The degree of safety sought on a machine often depends on the reliability of a switch, especially during an emergency shutdown.
The MP700 series provides this guarantee thanks to the switch’s positive opening operation and the rigid mechanical linkage between the controller and the contact bridge causing the breaker circuit to open.
|
Descriptions |
| MP720 | MP730 ... MP760 | ||
| Approval | IEC 947-5-1 | ||
| Housing | Glass fiber reinforced | Thermoplastic - Metal | |
| Mechanism |
Forced break Slow action |
Forced break Slow action - Snap action |
|
| Circuit | 1NO + 1NC | ||
| Termination |
Cable moulded 0.75 mm2 PVC -20°C to 70°C PUR -40°C to 90°C SI -40°C to 130°C |
Cable moulded 0.75 mm2 PVC -20°C to +70°C |
|
| Actuator | Variety of operation heads | ||
| Degree of protection | IP67 | ||
| Power rating |
AC-15 3A DC-13 0.27A |
AC-15 1.5A DC-13 0.1A |
|
| Thermal current | 6A | 5A | |
| Dimensions | 50 x 30 x 16 mm |
50 x 30 x 16 mm 50 x 35 x 16 mm |
|
| Operating temperature range | -40°C to +130°C | -20°C to +70°C | |
| Mechanical life | 10 x 106 | ||
Microswitch SERIE MP500
Microswitch SERIES MP500
A Subminiature microswitch of standardized small dimensions. The microswitch MP500 series stands out from other products on the market in terms of its mechanical service life and the choice of materials, wich enable it to resist temperatures up to 105 °C (221°F).
|
Descriptions |
| Approvals |
EN 61058-1 UL 61058-1 |
|
| Housing | Glass fiber reinforced | |
| Plunger | PES | |
| Membrane | Fluorsilicone elastomer | |
| Mechanism Contacts | Change-over, Snap action coil spring mechanism with stainless steel spring | |
| Contact material | Fine Silver, Gold contact upon request | |
| Termination |
Cable PVC -20°C to 105°C (-4°F to 221°F) Solder terminal -40°C to 105°C (-4°F to 221°F) PCB -40°C to 105°C (-4°F to 221°F) |
|
| Actuator | Overall dimensions in stainless steel, flat lever , roller, simulated roller | |
| Degree of protection |
IP67 |
|
| Class of protection |
I 250V II / III 24V |
|
| Pollution degree | 3 | |
| Proof tracking index PTI | 250V | |
| Rated Impulse Withstand Voltage | 2.5 kV | |
| Glow-wire temp. | 850°C | |
| Micro-disconnection | μ | |
| Contact-gap | 0.40 mm | |
| Dimensions |
DIN 41 635, form B 20 x 16 x 6.5 mm (0.7874 x 0.6299 x 0.2559 in) |
|
|
Power rating UL / EN 61058 (Resistive Load) |
5RA 250VAC 25'000 cycles 2RA 250VAC 50'000 cycles 0.1RA 24VDC 50'000 cycles |
|
| Operating range force | 1.0 to 2.5 N, depending actuator | |
| Operating temperature range | -40°C to 105°C (-40°F to 221°F) | |
| Mechanical life | 10 x 106 | |
| C000 : Solder terminals (mm) | |
Flexible conductors to be used. With provisions for securing the conductor by mechanical means and providing circuit continuity by soldering. Soldering by hand with a soldering iron.
Remark : Avoid overheating as this may damage the switch. |
|
| C001 : PCB terminals (mm) | |
| C100 : PVC cable overmould (mm) | |
|
Actuator |
| Type L00 : Pin plunger - without lever | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) / (in) Operating Position Pa (mm) / (in) Over-travel sr min. (mm) / (in) Differential movement sd max. (mm) / (in) |
2.5 0.5 9.2 ± 0.2 / 0.3622 ± 0.0079 8.7 ± 0.2 / 0.3425 ± 0.0079 0.6 / 0.0236 0.05 / 0.0020 |
|
| Type L70 : Flat lever - position A | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) / (in) Operating Position Pa (mm) / (in) Over-travel sr min. (mm) / (in) Differential movement sd max. (mm) / (in) |
1.0 0.15 12.0 ± 0.4 / 0.4724 ± 0.0157 10.0 ± 0.4 / 0.3937 ± 0.0157 1.2 / 0.0472 0.40 / 0.0157 |
|
| Type L71 : Flat lever - position B | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) / (in) Operating Position Pa (mm) / (in) Over-travel sr min. (mm) / (in) Differential movement sd max. (mm) / (in) |
2.0 0.3 10.3 ± 0.4 / 0.4055 ± 0.0157 9.4 ± 0.4 / 0.3701 ± 0.0157 0.6 / 0.0236 0.30 / 0.0118 |
|
| Type L80 : Roller - position A | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) / (in) Operating Position Pa (mm) / (in) Over-travel sr min. (mm) / (in) Differential movement sd max. (mm) / (in) |
1.0 0.15 17.3 ± 0.4 / 0.6811 ± 0.0157 15.3 ± 0.4 / 0.6024 ± 0.0157 1.2 / 0.0472 0.40 / 0.0157 |
|
| Type L81 : Roller - position B | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) / (in) Operating Position Pa (mm) / (in) Over-travel sr min. (mm) / (in) Differential movement sd max. (mm) / (in) |
2.0 0.3 15.9 ± 0.4 / 0.6260 ± 0.0157 15.0 ± 0.4 / 0.5906 ± 0.0157 0.6 / 0.0236 0.30 / 0.0118 |
|
| Type L85 : Simulated roller - position A | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) / (in) Operating Position Pa (mm) / (in) Over-travel sr min. (mm) / (in) Differential movement sd max. (mm) / (in) |
1.0 0.15 15.0 ± 0.4 / 0.5906 ± 0.0157 13.0 ± 0.4 / 0.5118 ± 0.0157 1.2 / 0.0472 0.40 / 0.0157 |
|
| Type L86 : Simulated roller - position B | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) / (in) Operating Position Pa (mm) / (in) Over-travel sr min. (mm) / (in) Differential movement sd max. (mm) / (in) |
2.0 0.3 13.5 ± 0.4 / 0.5315 ± 0.0157 12.6 ± 0.4 / 0.4961 ± 0.0157 0.6 / 0.0236 0.30 / 0.0118 |
|
| Standard wiring diagram |
| Switching diagram | |||
|
Solder terminal PCB |
C000 C001 |
||
| PVC cable | C10. / C20. |
1 - Black 2 - Grey 4 - Blue |
| Ordering information |
| MP5 | 0 | 0 | - | L70 | - | C100 | |
|
Housing 0 : IP67 with membrane 5 : IP40 without membrane |
|||||||
|
Contact material 0 : Silver contact 1 : Gold contact |
|||||||
|
Actuator 0: Basic switch - pin plunger L70 : Flat lever - A position L71 : Flat lever - B position L80 : Roller - A position L81 : Roller - B position L85 : Simulated Roller - A position L86 : Simulated Roller - B position |
|||||||
|
Terminals C000 : Solder C001 : PCB C100 : Cable PVC, 3x0.25 mm2, 250VAC 2A 0.5 (m) / 19.69 (in) C101 : Cable PVC, 3x0.25 mm2, 250VAC 2A 1 (m) / 39.37 (in) C102 : Cable PVC, 3x0.25 mm2, 250VAC 2A 2 (m) / 78.74 (in) C200 : Cable PVC, 3x0.50 mm2, 250VAC 5A 0.5 (m) / 19.69 (in) C201 : Cable PVC, 3x0.50 mm2, 250VAC 5A 1 (m) / 39.37 (in) C202 : Cable PVC, 3x0.50 mm2, 250VAC 5A 2 (m) / 78.74 (in) |
Microswitch SERIE MP400
Microswitch SERIES MP400
Standardized small dimension subminiature microswitch. The MP400 serie offers large possibilities of customisation and answers to all targeted inquiries, in terms of housing,connections or actuators. This serie enables you to build your microswitch with your own requirements.
|
Descriptions |
| Approvals |
EN 61058-1 Upon request: UL 61058-1 |
| Housing | Glass fiber reinforced |
| Plunger | PES |
| Membrane | Fluorsilicone elastomer |
| Mechanism Contacts | Change-over, Snap action coil spring mechanism with stainless steel spring |
| Contact material | Fine Silver, Gold contact upon request |
| Termination |
Cable or wires in standard and length to be defined PVC -20°C to 70°C SI -40°C to 105°C PUR -40°c to 90°C Other cable material and length upon request PTFE, RXL,... |
| Type of conductor |
Flexible conductors Solder terminal with provisions for securing the conductor by mechanical means and providing circuit continuity by soldering |
| Cable outlet |
Standard side of button Other side upon request |
| Actuator | Overall dimensions in stainless steel, flat lever , roller, simulated roller |
| Degree of protection |
IP67 |
| Class of protection |
I 250V II / III 24V |
| Pollution degree | 3 |
| Proof tracking index PTI | 250V |
| Rated Impulse Withstand Voltage | 2.5 kV |
| Glow-wire temp. | 850°C |
| Micro-disconnection | μ |
| Contact-gap | 0.40 mm |
| Dimensions |
DIN 41 635, form B 20 x 16 x 6.5 mm |
|
Power rating UL / EN 61058 (Resistive Load) |
5RA 250VAC 25'000 cycles 2RA 250VAC 50'000 cycles 0.1RA 24VDC 50'000 cycles |
| Operating range force | 1.0 to 2.5 N, depending actuator |
| Operating temperature range | -40°C to 105°C |
| Mechanical life | 10 x 106 |
|
Standardised Actuator - Upon request other actuator |
| Type 0 : Pin plunger - without lever | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
2.5 0.5 9.2 ± 0.2 8.7 ± 0.2 0.6 0.05 |
|
| Type 7JA : Flat lever - position A | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm |
1.0 0.15 12.0 ± 0.4 10.0 ± 0.4 1.2 0.40 |
|
| Type 7JB : Flat lever - position B | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm |
2.0 0.3 10.3 ± 0.4 9.4 ± 0.4 0.6 0.30 |
|
| Type 8JAL : Roller - position A | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm |
1.0 0.15 17.3 ± 0.4 15.3 ± 0.4 1.2 0.40 |
|
| Type 8JBL : Roller - position B | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm |
2.0 0.3 15.9 ± 0.4 15.0 ± 0.4 0.6 0.30 |
|
| Type 8JGSA : Simulated roller - position A | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm |
1.0 0.15 15.0 ± 0.4 13.0 ± 0.4 1.2 0.40 |
|
| Type 8JGSB : Simulated roller - position B | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm |
2.0 0.3 13.5 ± 0.4 12.6 ± 0.4 0.6 0.30 |
|
| Standard wiring diagramm |
| Diagram | Couleur | |
| Direct Action |
1 : Brun 2 : Blanc 4 : Vert |
| Ordering information |
| MP43 | 0 | - | 7JA | / | 325 | / | 100 | PVC | |
|
Contact material 0 : Silver contact 1 : Gold contact |
|||||||||
|
Actuator 0: Basic switch - pin plunger 7JA : Flat lever - A position 7JB : Flat lever - B position 8JAL : Roller - A position 8JBL : Roller - B position 8JGSA : Simulated Roller - A position 8JGSB : Simulated Roller - B position |
|||||||||
|
325 : 3 wiring section 0.25 mm2 350 : 3 wiring section 0.50 mm2 |
|||||||||
| Length of cable in centimeter (cm) | |||||||||
|
Material of cable PVC: Polyvinyl Chloride PUR: Polyurethane SI: Silicone |
Microswitch SERIE MP300
Microswitch SERIES MP300
A miniature IP67/68 microswitch with a service range up to 170°C and stainless steel levers, for a wide range of applications, including those in the most hostile industrial environments. The microswitch MP300 Series features unparalleled flexibility in terms of levers and standard telescopic plungers. Together with the option of manufacturing customized actuators, the applications are virtually unlimited.
|
Descriptions |
| Approvals |
EN 61058-1 Upon request: UL 1054, CSA C22.2, ATEX II3d/Ex t IIIB 84°C Dc |
| Housing | Glass fiber reinforced |
| Plunger | PPS |
| Membrane | Fluorsilicone elastomer, other material upon request |
| Mechanism Contacts | Change-over, Snap-action with blade in Beryllium Copper |
| Contact material | Fine Silver, Gold contact upon request |
| Termination |
Cable and Leads: Standard 0.75 mm2 / 18AWG PVC / PVCU -20°C to 70°C PUR -40°C to 90°C SI -40°C to 130°C PTFE -40° to 170°C Other material upon request |
| Cable outlet |
Standard side of button Other side upon request |
| Actuator | Overall dimensions in stainless steel |
| Degree of protection |
IP67 Upon request IP68 |
| Class of protection | II |
| Micro-switch | μ |
| Contact-gap | 0.80 mm |
| Dimensions |
DIN 41 635, form A 31 x 24 x 10.3 mm |
| Power rating | 250VAC / 6A |
| Operating range force | 1.3 to 4.0 N, depending actuator |
| Operating temperature range |
EN 61058 -40°C to +130°C depending cable (+170°C upon request) UL 1054 +90°C (upon request) EN 60079 (ATEX) -15°C to +80°C (upon request) CSA - C22.2 T amb. (upon request) |
| Mechanical life | 50 x 106 |
| Standards |
EN61058 50'000 cycles UL1054 10'000 cycles CSA C22.2 6'000 cycles |
|
Actuator |
| Type 0 : Basic switch | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
3.5 1.0 15.3 ± 0.3 14.7 ± 0.2 0.20 0.05 |
|
| Type 1MS27 : Telescopic plunger | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
3.5 1.0 27.7 ± 0.6 27.2 ± 0.3 2.0 0.1 |
|
| Type 1M : Telescopique plunger, thread | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
3.5 1.0 50.3 ± 0.6 49.7 ± 0.3 5.0 0.1 |
|
| Type 1ML : Telescopic with roller, thread - upon request transversal roller | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
3.5 1.0 49.8 ± 0.6 48.3 ± 0.3 5.0 0.1 |
|
| Type 3MA : Stiff lever - reverse action - Upon request lever outside of switch | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
2.5 1.0 26.0 ± 1.0 24.2 ± 0.6 2.5 0.8 |
|
| Type 5MAL : Stiff roller-lever - reverse action - Upon request lever outside of switch, Stainless steel roller | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
3.0 1.0 35.6 ± 1.0 34.0 ± 0.6 2.5 0.8 |
|
| Type 6MAL : Stiff tip-action roller - reverse action - Upon request lever outside of switch, Stainless steel roller | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
3.0 1.0 41.5 ± 1.0 39.8 ± 0.6 2.5 0.8 |
|
| Type 7M : Stiff lever - direct action | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
1.3 0.3 19.0 ± 1.0 16.5 ± 0.8 0.5 0.8 |
|
| Type 8ML25 : Stiff roller - lever - direct action - Upon request Stainless steel roller | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
3.5 1.0 26.5 ± 1.0 25.7 ± 0.3 0.2 0.1 |
|
| Standard wiring diagram |
| Code Actuator | Diagram | Color | |
| Direct action |
0 1MS27 1M 1ML 7M 8ML25 |
1 : Brown 2 : Black 4 : Blue |
|
| Reverse action |
3M 5MAL 6MAL |
| Ordering information |
| MP3 | 2 | 0 | - | 8ML25 | / | 375 | / | 100 | PVC | |
|
Housing 1: without lever 2: with lever |
||||||||||
|
Contact material 0: Silver contact 1: Gold contact |
||||||||||
|
Actuator 0: Basic switch - pin plunger 1MS27 : Plunger 1M : Plunger, thread short 1ML : Roller plunger, thread 3MA : Lever - reverse action 5MAL : Roller lever - reverse action 6MAL : Stiff roller lever - reverse action 7M : Direct action lever 8ML25 : Direct action roller lever |
||||||||||
|
375 : 3 Wires section 0.75 mm2 318 : For UL Certification 3 wires 18 AWG |
||||||||||
| Lenght of cable in cm | ||||||||||
|
Material of cable PVC: Polyvinyl Chloride PVCU : Switch with UL certification PUR: Polyurethane SI: Silicone |
Microswitch SERIE MP200
MICROSWITCH SERIES MP200
The MP200 is a IP67 sealed snap action microswitch with potted cable for demanding industrial applications. An IP68 protection with strengthened cable outlet and increased actuating force for operation in liquids is also available. All actuators are in stainless steel for maximum protection in hazardous industrial environments.
The switch can be supplied with 2 different electrical circuits. The MP210 Version is a single pole double throw microswitch for a power rating of 15A / 250VAC. In its MP220 version a single pole double break circuit can double-break a power line of up to 10A / 250VAC.
Operational Temperature rating under EN61058 is -40°C to +130°C, but temperature rating as well as the power rating may change based on the selected potted cable material and cross section
|
Descriptions |
MP210 |
MP220 |
|
| Approval |
EN 61058-1 UL 61058-1 upon request CSA C22.2 |
EN 61058-1 UL61058-1 |
| Standard |
EN 61058 50'000 cycles UL 61058 50'000 cycles CSA C22.2 6'000 cycles |
EN 61058 50'000 cycles UL 61058 50'000 cycles |
| Power rating |
250VAC / 15A - Wires 1.50 mm2 400VAC / 10A - Wires 1.00 mm2 |
250VAC / 10A - Wires 1.00 mm2 |
| Housing | Glass fiber reinforced (PBT or PA 6T/66) | |
| Plunger | PC | |
| Membrane | Fluorsilicone - Upon request other material | |
| Mechanism | Snap-action with blade in Beryllium Copper | |
| Contact material | Fine Silver, Gold contact upon request | |
| Termination cable |
PVC -20°C to 70°C PVCU -20°C to 105°C PUR -40°C to 90°C SI -40°C to 130°C |
|
| Actuator | All parts in stainless steel | |
| Degree of protection |
Housing IP67 - Upon request IP68 Connexion IP67 |
|
| Class of protection | II | |
| Micro-switch | μ | |
| Contac-gap | 0.80 mm | |
| Dimensions |
DIN 41 635, E - form 49 x 35 x 17.5 mm |
|
| Operating range force | 0.2 to 6.0 N, depending on actuator | |
|
Operating temperature housing (cable choice may lower temperature) |
EN 61058 -40°C to +130°C (PBT and PA 6T/66) UL 61058 -40°C to +115°C (PA 6T/66) UL 61058 -40°C to +125°C from the second half of 2014 (PBT) |
|
| Mechanical life | 50 x 106 | |
|
Actuator |
| Type 0 : Basic switch | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
6.0 2.5 17.4 ± 0.5 16.5 ± 0.3 0.25 0.10 |
|
| Type 1S29 : Plunger | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
6.0 2.5 29.3 ± 0.6 28.4 ± 0.3 2.0 0.12 |
|
| Type 1A : Plunger, thread short | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
6.0 2.5 39.1 ± 0.6 38.4 ± 0.3 5.0 0.12 |
|
| Type 1A58 : Plunger, thread | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
6.0 2.5 58.0 ± 1.0 57.2 ± 0.3 10.0 0.12 |
|
| Type 1BL : Roller plunger, thread - Upon request steel roller , transversal roller | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
6.0 2.5 51.4 ± 0.6 50.7 ± 0.3 5.0 0.12 |
|
| Type 3A : Lever - reverse action - Upon request lever other side | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
4.5 1.2 31.1 ± 1.5 29.0 ± 1.5 3.5 0.80 |
|
| Type 5AL : Roller lever - reverse action - Upon request lever other side, steel roller, transversal roller | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
4.5 1.2 35.5 ± 1.5 32.5 ± 1.5 3.5 0.90 |
|
| Type 6AL : Stiff roller lever - reverse action - Upon request lever other side, steel roller, transversal roller | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
4.5 1.2 41.6 ± 1.5 38.6 ± 1.5 3.5 0.90 |
|
| Type 7A40 : Direct action adjustable lever | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
0.6 0.2 - Ajustable - 1.20 |
|
| Type 7AC : Direct action adjustable lever | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
0.2 0.05 - Ajustable - 5.00 |
|
| Type 8AL40 : Direct action adjustable roller lever | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
0.6 0.2 - Ajustable - 1.20 |
|
| Standard wiring diagram |
| Code Actuator | Diagram | Color | ||
| Direct action |
0 1S29 1A 1A58 1BL 7A40 7AC 8AL40 |
MP210 |
PVC / PVCU : 1 / Brown - 2 / Black - 4 / Blue SI : 1 / Red - 2 / White - 4 / Blue PUR : 1 / Red - 2 / White - 4 / Blue |
|
| MP220 |
PVC / PVCU : 11/12 - Brown ; 23/24 - Blue SI : 11/12 - White ; 23/24 - Blue PUR : 11/12 - Brown ; 23/24 - Blue |
|||
| Reverse action |
3A 5AL 6AL |
MP210 |
PVC / PVCU : 1 / Brown - 2 / Blue - 4 / Black SI : 1 / Red - 2 / Blue - 4 / White PUR : 1 / Red - 2 / Blue - 4 / White |
|
| MP220 |
PVC / PVCU : 11/12 - Brown ; 23/24 - Blue SI : 11/12 - White ; 23/24 - Blue PUR : 11/12 - Brown ; 23/24 - Blue |
|||
| Ordering information |
| MP2 | 1 | 0 | - | 5AL | / | 3 | 100 | / | 200 | SI | |
|
Circuit 1 : Changeover 2 : Double break |
|||||||||||
|
Contact material 0 : Silver contact 1 : Gold contact |
|||||||||||
|
Actuator 0: Basic switch - pin plunger 1S29 : Plunger 1A : Plunger, thread short 1A58 : Plunger, thread 1BL : Roller plunger, thread 3A : Lever - reverse action 5AL : Roller lever - reverse action 6AL : Stiff roller lever - reverse action 7A40 : Direct action adjustable lever 7AC : Direct action adjustable lever 8AL40 : Direct action adjustable roller lever |
|||||||||||
|
Number of conducteur 3 : MP210 Changeover 4 : MP220 Double break |
|||||||||||
|
Wires Section 100 : 1.00mm2 - 400VAC / 10A (MP210); 250VAC / 10A (MP220) 150 : 1.50mm2 - 250VAC / 15A (MP210) |
|||||||||||
|
Length of the cable in centimeter (cm) |
|||||||||||
|
Cable material PVC : -20°C to +70°C PVCU : -20° to 105°C SI : Silicone -40°c to +130°C PUR : Polyurethane -40°C to +90°C |
Microswitch SERIE MP110
Microprecision SERIES MP110
Sealed basic snap action microswitch. A precision microswitch for high breaking capacity, the MP110 serie offers IP67 protection using wide range of interchangeable actuators.
The switching mechanism is completely protected by the housing, which is itself assembled by ultrasonic welding. However, as it has protruding connection terminals, it has to be provided with an accessory system of connection,
which can be :
- Push-on clips 6.35 x 0.80 mm (AMP)
- Plug-in system of connection MP100-.. IP67
- Protective terminal covers MP110-Z.. IP64
|
Descriptions |
| Approval |
EN 61058-1 UL 61058-1 |
| Housing | Glass fiber reinforced (PBT or PA 6T/66) |
| Plunger | PC |
| Membrane | Fluorsilicone - Upon request other material |
| Mechanism Contacts | Change-over, Snap-action with blade in Beryllium Copper |
| Contact material | Fine Silver, Gold contact upon request |
| Termination | Push-on clip 6.35 x 0.80 mm, protective cover |
| Actuator | Overall dimensions in stainless steel |
| Degree of protection |
Housing IP67 Terminals IP00 Plug-in MP100 IP67 Protective cover IP64 |
| Class of protection | II |
| Micro-switch | μ |
| Contac-gap | 0.50 mm |
| Dimensions |
DIN 41 635, EF - form 49 x 21.5 x 17.5 mm |
| Power rating |
400VAC / 10A 250VAC / 15A |
| Operating range force | 0.2 to 6.0 N, depending actuator |
| Operating temperature range |
EN 61058 -40°C to +130°C (PBT and PA 6T/66) UL 61058 -40°C to +115°C (PA 6T/66) UL 61058 -40°C to +125°C from the second half of 2014 (PBT) |
| Mechanical life | 50 x 106 |
| Standard | 50'000 cycles |
|
Actuator |
| Type 0 : Basic switch | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
6.0 3.0 17.4 ± 0.5 16.7 ± 0.3 0.25 0.06 |
|
| Type 1S29 : Plunger | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
6.0 3.0 29.3 ± 0.6 28.5 ± 0.3 2.0 0.08 |
|
| Type 1A : Plunger, thread short | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
6.0 3.0 39.1 ± 0.6 38.4 ± 0.3 5.0 0.08 |
|
| Type 1A58 : Plunger, thread | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
6.0 2.5 58.0 ± 1.0 57.3 ± 0.3 10.0 0.10 |
|
| Type 1BL : Toller plunger, thread - Upon request steel roller , transversal roller | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
6.0 3.0 51.3 ± 0.6 50.6 ± 0.3 5.0 0.08 |
|
| Type 3A : Lever - reverse action - Upon request lever other side | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
4.5 1.2 31.3 ± 1.5 28.3 ± 1.5 3.5 0.50 |
|
| Type 5AL : Roller lever - reverse action - Upon request lever other side, steel roller, transversal roller | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
4.5 1.2 35.8 ± 1.5 31.9 ± 1.5 3.5 0.60 |
|
| Type 6AL : Stiff roller lever - reverse action - Upon request lever other side, steel roller, transversal roller | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
4.5 1.2 41.9 ± 1.5 37.9 ± 1.5 3.5 0.60 |
|
| Type 7A40 : Direct action adjustable lever | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
0.6 0.2 - - - 0.80 |
|
| Type 7AC : Direct action adjustable lever | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
0.2 0.05 - - - 4.00 |
|
| Type 8AL40 : Direct action adjustable roller lever | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
0.6 0.2 - - - 0.80 |
|
| Standard wiring diagram |
| Code Actuator | Diagram | Color MP100-../... | |
| Direct action |
0 1S29 1A 1A58 1BL 7A40 7AC 8AL40 |
PVC : 1 / Brown - 2 / Black - 4 / Blue SI : 1 / Red - 2 / White - 4 / Blue PUR : 1 / Red - 2 / White - 4 / Blue |
|
| Reverse action |
3A 5AL 6AL |
PVC : 1 / Brown - 2 / Blue - 4 / Black
SI : 1 / Red - 2 / Blue - 4 / White PUR : 1 / Red - 2 / Blue - 4 / White |
| Option terminal |
| MP110-Z | |
| MP100-../.. | |
|
Description L : Length of the cable in meter |
MP100-K(L)/10 PVC cable 3 x 1 mm2 -20°C to +70°C; 400VAC 10A MP100-K(L)/15 PVC cable 3 x 1.5 mm2 -20°C to +70°C; 250VAC 15A MP100-SI(L)/10 Silicone cable 3 x 1 mm2 -40°C to +130°C; 400VAC 10A MP100-SI(L)/15 Silicone cable 3 x 1.5 mm2 -40°C to +130°C; 250VAC 15A MP100-PUR(L)/10 Polyurethane cable 3 x 1 mm2 -40°C to +90°C; 400VAC 10A MP100-PUR(L)/15 Polyurethane cable 3 x 1.5 mm2 -40°C to +90°C; 250VAC 15A |
| Ordering information |
| MP11 | 0 | - | 5AL | + | MP100-K2/10 | |
|
Contact material 0: Silver contact 1: Gold contact |
||||||
|
Actuator 0: Basic switch - pin plunger 1S29 : Plunger 1A : Plunger, thread short 1A58 : Plunger, thread 1BL : Roller plunger, thread 3A : Lever - reverse action 5AL : Roller lever - reverse action 6AL : Stiff roller lever - reverse action 7A40 : Direct action adjustable lever 7AC : Direct action adjustable lever 8AL40 : Direct action adjustable roller lever |
||||||
| If needed Connecting | ||||||
|
MP110-Z Protective cover IP64 MP100-K../.. Plug-in PVC cable L(m), option 10A or 15A MP100-SI../.. Plug-in Silicone cable L(m), option 10A or 15A MP100-PUR../.. Plug-in Polyurethane cable L(m), option 10A or 15A |
Microswitch SERIE MP90
Microswitch SERIES MP90
Sealed basic snap action microswitch. A precision microswitch for high breaking capacity, the MP90 serie offers IP67 protection with screw lugs using wide range of interchangeable actuators.
This type is perfectly sealed : the switching mechanism is completely protected by the housing, which is itself assembled by ultrasonic welding.
|
Descriptions |
| Approval |
EN 61058-1 UL 61058-1 |
| Housing | Glass fiber reinforced (PBT or PA 6T/66) |
| Plunger | PC |
| Membrane | Fluorsilicone - Upon request other material |
| Mechanism Contacts | Change-over, Snap-action with blade in Beryllium Copper |
| Contact material | Fine Silver, Gold contact upon request |
| Termination | Screw lugs |
| Actuator | Overall dimensions in stainless steel |
| Degree of protection |
Housing IP67 Terminals IP00 |
| Class of protection | II |
| Micro-switch | μ |
| Contac-gap | 0.50 mm |
| Dimensions |
DIN 41 635, ES - form 49 x 25 x 17.5 mm |
| Power rating |
400VAC / 10A 250VAC / 15A |
| Operating range force | 0.2 to 6.0 N, depending actuator |
| Operating temperature range |
EN 61058 -40°C to +130°C (PBT and PA 6T/66) UL 61058 -40°C to +115°C (PA 6T/66) UL 61058 -40°C to +125°C from the second half of 2014 (PBT) |
| Mechanical life | 50 x 106 |
| Standard | 50'000 cycles |
|
Actuator |
| Type 0 : Basic switch | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
6.0 3.0 17.4 ± 0.5 16.7 ± 0.3 0.25 0.06 |
|
| Type 1S29 : Plunger | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
6.0 3.0 29.3 ± 0.6 28.5 ± 0.3 2.0 0.08 |
|
| Type 1A : Plunger, thread short | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
6.0 3.0 39.1 ± 0.6 38.4 ± 0.3 5.0 0.08 |
|
| Type 1A58 : Plunger, thread | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
6.0 2.5 58.0 ± 1.0 57.3 ± 0.3 10.0 0.10 |
|
| Type 1BL : Toller plunger, thread - Upon request steel roller , transversal roller | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
6.0 3.0 51.3 ± 0.6 50.6 ± 0.3 5.0 0.08 |
|
| Type 3A : Lever - reverse action - Upon request lever other side | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
4.5 1.2 30.3 ± 1.5 28.5 ± 1.5 3.5 0.50 |
|
| Type 5AL : Roller lever - reverse action - Upon request lever other side, steel roller, transversal roller | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
4.5 1.2 34.4 ± 1.5 31.9 ± 1.5 3.5 0.60 |
|
| Type 6AL : Stiff roller lever - reverse action - Upon request lever other side, steel roller, transversal roller | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
4.5 1.2 40.5 ± 1.5 37.9 ± 1.5 3.5 0.60 |
|
| Type 7A40 : Direct action adjustable lever | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
0.6 0.2 - - - 0.80 |
|
| Type 7AC : Direct action adjustable lever | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
0.2 0.05 - - - 4.00 |
|
| Type 8AL40 : Direct action adjustable roller lever | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
0.6 0.2 - - - 0.80 |
|
| Standard wiring diagram |
| Code Actuator | Diagram | ||
| Direct action |
0 1S29 1A 1A58 1BL 7A40 7AC 8AL40 |
||
| Reverse action |
3A 5AL 6AL |
| Ordering information |
| MP9 | 0 | - | 5AL | |
|
Contact material 0: Silver contact 1: Gold contact |
||||
|
Actuator 0: Basic switch - pin plunger 1S29 : Plunger 1A : Plunger, thread short 1A58 : Plunger, thread 1BL : Roller plunger, thread 3A : Lever - reverse action 5AL : Roller lever - reverse action 6AL : Stiff roller lever - reverse action 7A40 : Direct action adjustable lever 7AC : Direct action adjustable lever 8AL40 : Direct action adjustable roller lever |
Microswitch SERIE MP40
Microswitch SERIES MP40
Basic snap action microswitch. A precision microswitch for high breaking capacity, the MP40 serie offers IP40 protection with screw lug or solder terminals using wide range of interchangeable actuators.
|
Descriptions |
| Approval |
EN 61058-1 UL 61058-1 |
| Housing | Glass fiber reinforced (PBT or PA 6T/66) |
| Plunger | PBT |
| Mechanism Contacts | Change-over, Snap-action with blade in Beryllium Copper |
| Contact material | Fine Silver, Gold contact upon request |
| Termination | Screw, soldering lugs, protective cover upon request |
| Actuator | Overall dimensions in stainless steel |
| Degree of protection |
Housing IP40 Terminals IP00 Cover IP20 |
| Class of protection | II |
| Micro-switch | μ |
| Contac-gap | 0.30 mm |
| Dimensions |
DIN 41 635, form A 49 x 21 x 17 mm |
| Power rating |
250VAC / 15A |
| Operating range force | 0.2 to 6.0 N, depending actuator |
| Operating temperature range |
EN 61058 -40°C to +130°C (PBT and PA 6T/66) UL 61058 -40°C to +110°C (PA 6T/66) UL 61058 -40°C to +130°C from the second half of 2014 (PBT) |
| Mechanical life | 50 x 106 |
| Standard | 50'000 cycles |
|
Actuator |
| Type 0 : Basic switch | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
5.0 2.5 16.3 ± 0.5 15.9 ± 0.3 0.25 0.05 |
|
| Type 1S29 : Plunger | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
5.0 2.5 28.4 ± 0.6 27.9 ± 0.3 2.0 0.05 |
|
| Type 1A : Plunger, thread short | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
5.0 2.5 38.0 ± 0.6 37.5 ± 0.3 5.0 0.05 |
|
| Type 1A58 : Plunger, thread | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
5.0 2.5 57.2 ± 1.0 56.7 ± 0.3 10.0 0.10 |
|
| Type 1BL : Toller plunger, thread - Upon request steel roller , transversal roller | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
6.0 3.0 51.3 ± 0.6 50.6 ± 0.3 5.0 0.08 |
|
| Type 3A : Lever - reverse action - Upon request lever other side | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
4.5 1.5 28.7 ± 1.5 26.8 ± 1.5 3.5 0.50 |
|
| Type 5AL : Roller lever - reverse action - Upon request lever other side, steel roller, transversal roller | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
4.5 1.5 32.4 ± 1.5 30.0 ± 1.5 3.5 0.50 |
|
| Type 6AL : Stiff roller lever - reverse action - Upon request lever other side, steel roller, transversal roller | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
4.5 1.5 38.4 ± 1.5 36.0 ± 1.5 3.5 0.50 |
|
| Type 7A40 : Direct action adjustable lever | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
0.5 0.15 - - - 0.70 |
|
| Type 7AC : Direct action adjustable lever | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
0.2 0.05 - - - 3.00 |
|
| Type 8AL40 : Direct action adjustable roller lever | ||
|
Actuating Force Fa max. (N) Release Force Fr min (N) Free Position Pr (mm) Operating Position Pa (mm) Over-travel sr min. (mm) Differential movement sd max. (mm) |
0.5 0.15 - - - 0.70 |
|
|
Standard wiring diagram |
| Code Actuator | Diagram | ||
| Direct action |
0 1S29 1A 1A58 1BL 7A40 7AC 8AL40 |
||
| Reverse action |
3A 5AL 6AL |
| Ordering information |
| MP | 4 | 0 | - | 5AL | + | MP40-Z | |
|
Housing 4 : screw terminal 5 : soldering lugs |
|||||||
|
Contact material 0 : Silver contact 1 : Gold contact |
|||||||
|
Actuator 0: Basic switch - pin plunger 1S29 : Plunger 1A : Plunger, thread short 1A58 : Plunger, thread 1BL : Roller plunger, thread 3A : Lever - reverse action 5AL : Roller lever - reverse action 6AL : Stiff roller lever - reverse action 7A40 : Direct action adjustable lever 7AC : Direct action adjustable lever 8AL40 : Direct action adjustable roller lever |
|||||||
|
|
|||||||
|
Option Protection cover MP40-Z |
MP700 / P720 Security Switch / Limit Switch
Microprecision MP700 /MP720 Security Switch / Limit Switch
A sealed position switch, with positive opening operation, dual breaking, with direct connection by cable moulded into the housing. The degree of safety sought on a machine often depends on the reliability of a switch, especially during an emergency shutdown. The MP700 series provides this guarantee thanks to the switch’s positive opening operation and the rigid mechanical linkage between the controller and the contact bridge causing the breaker circuit to open.
|
Descriptions |
| MP720 | MP730 ... MP760 | ||
| Approval | IEC 947-5-1 | ||
| Housing | Glass fiber reinforced | Thermoplastic - Metal | |
| Mechanism |
Forced break Slow action |
Forced break Slow action - Snap action |
|
| Circuit | 1NO + 1NC | ||
| Termination |
Cable moulded 0.75 mm2 PVC -20°C to 70°C PUR -40°C to 90°C SI -40°C to 130°C |
Cable moulded 0.75 mm2 PVC -20°C to +70°C |
|
| Actuator | Variety of operation heads | ||
| Degree of protection | IP67 | ||
| Power rating |
AC-15 3A DC-13 0.27A |
AC-15 1.5A DC-13 0.1A |
|
| Thermal current | 6A | 5A | |
| Dimensions | 50 x 30 x 16 mm |
50 x 30 x 16 mm 50 x 35 x 16 mm |
|
| Operating temperature range | -40°C to +130°C | -20°C to +70°C | |
| Mechanical life | 10 x 106 | ||