XSIS QPL | M55310 OSCILLATORS
Qualified Product List (QPL) Oscillators are quartz crystal oscillator products that are built to meet MIL-PRF-55310
Gemini Electronic Components selection of MIL-PRF-55310 QPL Oscillators have been subjected to formal QPL qualification under MIL-PRF-55310 for a wide range of military, commuunication and OEM Applications. PLEASE CONTACT US FOR PRICE AND DELIVERY!
Type Number |
Supply Voltage |
Output Type |
Output Enable |
Frequency Range | Package Outline |
M55310/08 (contact us for datasheet) |
5.0 VDC | TTL | No | 100.0 Hz - 50.0 MHz | 14 Pin DIP |
M55310/09 |
5.0 VDC | TTL | No | 400.0 KHz - 60.0 MHz | 8 Pin Round |
M55310/11 |
5 to 15 VDC | CMOS | No | 50 KHz - 10.0 MHz | 14 Pin DIP |
M55310/14 |
5.0 VDC | TTL | No | 100.0 Hz - 25.0 MHz | 14 Pin DIP |
M55310/15 |
5 to 15 VDC | CMOS | No | 5.25 Hz - 10.0 MHz | 14 Pin DIP |
M55310/16 |
5.0 VDC | TTL | No | 100.0 Hz - 80.0 MHz | 14 Pin DIP |
M55310/17 |
5.0 VDC | TTL (GATED) | Yes | 250.0 KHz - 50.0 MHz | 14 Pin DIP |
M55310/18 |
5 to 15 VDC | CMOS | No | 5.25 Hz - 15.0 MHz | 14 Pin DIP |
M55310/19 |
5.0 VDC | TTL | No | 1.0 MHz - 60.0 MHz | .485"Sq. LCC |
M55310/26 |
5.0 VDC | HCMOS | No | 10.0 KHz - 65.0 MHz | 14 Pin DIP |
M55310/26 |
5.0 VDC | HCMOS | No | 10.0 KHz - 65.0 MHz | 4 Pin DIP |
M55310/27 |
5.0 VDC | HCMOS | Yes | 1.0 MHz - 85.0 MHz | 9x14mm "J" Leads |
M55310/30 |
3.3 VDC | HCMOS | Yes | 450.0 KHz - 85.0 MHz | 9x14mm "J" Leads |
Our MIL-PRF-55310 Crystal Oscillators are derived from MIL-PRF-55310 and are qualified on a sampling basis to insure that all units meet or exceed the required specifications. This sampling method, coupled with Workmanship Standards to MIL-PRF-38534, a Product Assurance Plan in accordance with MIL-STD-790 and a Quality System certified to ISO-9001, insures continued deliver of highquality Crystal Oscillator product. These tests include :
VIBRATION | 0.06" DA, 30G Peak, 10 - 2000 Hz, MIL-STD-202, Method 204, Cond. G | |
SHOCK | 1/2 Sine, 1500G Peak, MIL-STD-883, Method 2002, Cond. B | |
THERMAL SHOCK | MIL-STD-202, Method 107, Cond. B | |
ALTITUDE | MIL-STD-202, Method 105, Cond. C | |
MOISTURE RESISTANCE | MIL-STD-202, Method 106, Vibration Sub cycle Omitted | |
SALT SPRAY | MIL-STD-883, Method 1009, Cond. A | |
CONSTANT ACCELERATION | MIL-STD-883, Method 2001, 5000G | |
SOLDERABILITY | MIL-STD-202, Method 208 | |
RESISTANCE TO SOLDERING HEAT | MIL-STD-202, Method 210, Cond. C or B as Applicable | |
RESISTANCE TO SOLVENTS | MIL-STD-202, Method 215 | |
INTERNAL WATER VAPOR CONTENT | MIL-STD-883, Method 1018 |