Tel: 914-769-9200
sales@geminielec.com

altEMP-Protection USS-1 Series

USS-1 series surge protection devices are very compact and protect a single wire carrying a low voltage or signal and currents up to 0.5A.USS-1 surge protection devices are specially designed for feed-through installation into a bulkhead, e.g. directly into the metallic wall of a shielded room (Faraday's cage).Feed-through installation and high surge current capability allow simultaneous protection against lightning surges as well as HEMP / NEMP / EMP.USS-1 series products are threat-level HEMP-tested according to MIL-STD-188-125.A variety of USS-1 types are available for different applications, depending on the operating voltage.

USS-1-C

USS-1-C is an EMP-Protector / Filter which protects one wire of an analog telephone line or signal line having only a capacitif reference to ground.  USS-1-C can be used for signals up to +/-150V and currents up to 0.5A. The typical bandwidth limit is 180 kHz.If installed correctly USS-1-C works simultaneously as surge protection against NEMP / HEMP / EMP and lightning surges. USS-1-C datasheet

USS-1-6V

USS-1-6V is an EMP-Protector / Filter which protects a single wire of a signal or data line having an operating voltage up to 6V and an operating current up to 0.5A. The typical bandwidth is 300 kHz.If installed correctly USS-1-6V works simultaneously as surge protection against NEMP / HEMP / EMP and lightning surges. USS-1-6V datasheet

USS-1-12V

USS-1-12V is an EMP-Protector / Filter which protects a single wire of a signal or data line having an operating voltage up to 12V and an operating current up to 0.5A. The typical bandwidth limit is 300 kHz.If installed correctly USS-1-12V works simultaneously as surge protection against NEMP / HEMP / EMP and lightning surges. USS-1-12V datasheet

USS-1-15V

USS-1-15V is an EMP-Protector / Filter which protects a single wire of a signal or data line having an operating voltage up to 15V and an operating current up to 0.5A. The typical bandwidth limit is 300 kHz.  If installed correctly USS-1-15V works simultaneously as surge protection against NEMP / HEMP / EMP and lightning surges. USS-1-15V datasheet

USS-1-24V

USS-1-24V is an EMP-Protector / Filter which protects a single wire of a signal or data line having an operating voltage up to 24V and an operating current up to 0.5A. The typical bandwidth limit is 300 kHz. If installed correctly USS-1-24V works simultaneously as surge protection against NEMP / HEMP / EMP and lightning surges.  USS-1-24V datasheet

USS-1-48V

USS-1-48V is an EMP-Protector / Filter which protects a single wire of a signal or data line having an operating voltage up to 48V and an operating current up to 0.5A. The typical bandwidth limit is 300 kHz. If installed correctly USS-1-48V works simultaneously as surge protection against NEMP / HEMP / EMP and lightning surges.  USS-1-48V datasheet

Please publish modules in offcanvas position.