8/6 Decade Up Counter with 8 Decade Latch…. (40 Pins) |
|
LS7030 |
|
LS7031 |
 |
10MHz Count Frequency |
 |
Multiplexed BCD and 7-Segment (LS7030) data outputs |
 |
Leading Zero Blanking output |
 |
On-chip Scan Oscillator |
 |
Decimal Point and Overflow control inputs |
 |
The LS7031 can latch external prescalers into the two LSD latches for counting to 1 GHz
|
 |
4.75V to 15V operation |
|
6 Decade Pre-Determining Up/Down Counter…. (40 Pins) |
 |
LS7055; LS7056 |
 |
250 kHz Count Frequency |
 |
Fully Synchronous counting |
 |
Multiplexed BCD and 7 Segment data outputs |
 |
Preset, Presignal and Main Signal Storage Registers |
 |
Three Comparators with Output Flags |
 |
Thumbwheel interface for loading registers |
 |
On-chip Scan Oscillator |
 |
4.75V to 15V operation |
|
32-Bit/Dual 16-Bit Binary Up Counter…. (18 Pins) |
 |
LS7060, LS7060-S; LS7062, LS7062-S Last Updated: 01/27/03 |
 |
15MHz Count Frequency |
 |
Byte multiplexed Three-State data outputs |
 |
Unique Cascade Feature allows data bytes from many counters to be sequentially multiplexed to the output bus in a Multiple Counter System |
 |
32-bit latch |
 |
4.75V to 5.25V operation |
|
24-Bit Multi-Mode Counter…. (20 Pins) |
 |
LS7166, LS7166-S, LS7166-TS24 |
 |
25 MHz Count Frequency |
 |
8-Bit I/O bus |
 |
24-Bit Comparator |
 |
Programmable Count Modes: Quadrature (x1, x2, x4); Non-Quadrature, Normal/Modulo-N; 24 Hour Clock; Non-Recycle, Binary; BCD |
 |
TTL and CMOS compatible |
 |
3V to 5.5V operation |
|
24-Bit x 2 Multi-Mode Counter…. (28 Pins) |
 |
LS7266R1, LS7266R1-S, LS7266R1-TS |
 |
Up to 30MHz Count Frequency |
 |
8-Bit I/O bus |
 |
Dual 24-Bit Comparator |
 |
Programmable Count Modes: Quadrature (x1, x2, x4); Non-Quadrature, Normal/Modulo-N; Range Limit; Non-Recycle, Binary; BCD |
 |
TTL and CMOS compatible |
 |
3V to 5.5V operation |
|
32-Bit Multi-Mode Counter with Serial Interface.. (14 Pins) |
 |
LS7366R, LS7366R-S, LS7366R-TS |
 |
Synchronous (SPI) serial interface. |
 |
Up to 40 Mhz Counting Frequency |
 |
32-bit Counter, Comparator, Input and Output Registers |
 |
Two 8-bit registers to program functional modes |
 |
8-bit instruction register and 8-bit status register |
 |
Programmable input for Counter Load |
 |
Output Register Load or Counter Reset |
 |
Modulo-N; Non-recycle; Range-limit or Free Running modes of up/down counting |
 |
8-bit, 16-bit, 24-bit and 32-bit Programmable configuration |
 |
3V to 5.5V Operation |
|
24-Bit x 4 Multi-Mode Counter.. (48 Pins) |
 |
LS7566R-TS |
 |
Up to 40MHz Count Frequency |
 |
3-State Octal I/O Bus |
 |
Each of the four Binary Counters have independent Support Circuits: Comparators, Registers, Latches, etc. |
 |
Programmable count modes include : Quadrature (x1, x2, x4); Non-Quadrature (Up/Down); Free-Run, Non-Recycle, Modulo-N, Range-Limit |
 |
3V to 5.5V Operation |
|
32-Bit Quadrature Counters....(24; 28; 38; 48 Pins) |
 |
LS7766SO, LS7766SO-S, LS7766SO-TS; LS7766SH-TS 1-Axis NEW! |
LS7766DO, LS7766DO-S, LS7766DO-TS; LS7766DH-TS 2-Axis NEW! |
 |
Direct interface with Incremental Encoders |
 |
40MHz(5V). 20Mhz(3.3V) Quadrature Clock Frequency |
 |
Programmable I/Os for Index and Marker Flags |
 |
Separate mode-control registers for each axis |
 |
Sets of 32-bit counters,input registers, output registers, comparators and octal status registers for each axis |
 |
Digital filtering of input quadrature clocks |
 |
Pin selectable 3-state Hex / Octal bus |
 |
SD / DO = Single-axis / Dual-axes Octal I/O Bus |
 |
SH / DH = Single-axis / Dual-axes with pin selectable Hex / Octal I/O Bus |
 |
Programmable count modes include : Quadrature (x1, x2, x4); Non-Quadrature (Up/Down); Range Limit; Normal/Module-N; Non-Recycle |
 |
3V to 5.5V Operation |
|