| PERFORMANCE SPECIFICATIONS: |
| Temperature Range: |
-65°C to +200°C |
| Crimp Tensile Strength: |
Center conductor=45N min., Shield=110N min. |
| Gauge insertion and extraction force: |
| Insertion force from center contact: |
1.65N max. |
| Extraction force from center contact: |
0.25N min. |
| Insertion force from outer-body: |
8N max. |
| Extraction force from outer-body: |
Initial=1.2N min., After test=0.8N min. |
| Center contact max. pin gage: |
0.648 0/-0.0025 |
| Center contact min. pin gage: |
0.648 0/+0.0025 |
| Outer body max. pin gage: |
5.563 0/-0.005 |
| Outer body min. pin gage: |
5.512 0/+0.005 |
| Insulation Resistance: |
Measured between the signal contacts and between the signal contacts and outer-body |
| ≥ 5000 MΩ at ambient temperature |
| ≥ 1000 MΩ at 200°C |
| Dielectric Withstanding Voltage (DWV) Sea Level: |
≥1000V rms between signal contacts |
| ≥500V rms between signal contacts and outer-body |
| 70,000 feet: |
≥125V rms between signal contacts |
| ≥125V rms between signal contacts and outer-body |
| Contact resistance low-level Signal contacts: |
15 mΩ initials, 30 mΩ after the test |
| Contact resistance at rated current: rated current=1A for center contacts and 12A for outer-body |
| Center contacts: |
15 mΩ initials, 30 mΩ after the test |
| Outer-body: |
3 mΩ initials, 4 mΩ after the test |
| Characteristic Impedance: |
100Ω nominal |
| Return Loss: |
Should meet 7.4 of attachment 20 when measured according to IEC60603-7 Amd 1/ISO11801 or equivalent |
| Transfer impedance: |
Should meet the requirements of attachment 20, Section 7.6 when measured according to EN2591-212 or equivalent |
| Attenuation: |
Should meet the requirements of attachment 20, Section 7.2 when measured according to IEC60603-7 Amd 1/ISO11801 or equivalent |
| Cross Talk: |
Should meet the requirements of attachment 20, Section 7.2 when measured according to IEC60603-7 Amd 1/ISO11801 or equivalent |
